Utility

Items	Hits
Q10010407 - I connect a newly purchased Hitachi SATA II harddisk (Model No. HDS728080PLA380) to the Areca PCI SATA ll RAID card, the ArcHttpci software reports that the Current and Supported SATA Mode of the harddisk is SATA150+NCQ(Depth32) but not SATA300.	3075
Q10010601 - Is it possible to update the PCI-X/PCIe adapter firmware through in-band without having connected any hard disk?	2168
Q10010604 - Do all the notifications have to use the built in ethernet to function correctly? Is there anyway, for example, to use "alert by mail" via actual server ethernet (not the areca ethernet).	2381
Q10010607 - We are running Linux and would like to use the Smartmontools to extract the smart data from Areca disks using the command line. Is there a way to do this with smartctl/smartd ? If not, can we do it any other way? The web interface cannot be scripted for monitoring purposes so we need a CLI tool.	2671
Q10010704 - Archttp gives detailed information on volume sets (including stripe size, cache mode, etc.) via http://192.168.1.11:81/vol0.htm. The CLI lacks this information, it only shows base volume sets information, including name, RAID-Level, capacity.	2515
Q10010808- In cli I only see an option to upgrade the firmware. How can I use cli to also flash the boot.bin and bios.bin?	1901
Q10020602 - I have a NAS application. The system need to have our brand in the McRAID manager. I have the VM tool for the external raid. But does Areca have the VM tool for the PCI-RAID card for branding.	2041
Q10030501 - ArcHttp detects no controller, is because there are no disks connected?	2952
Q10030601 - I bought an Arc-1170 PCI-X card. I have a question about the SATA cables. Areca provides L- shaped on one end and 2 of them sit over each other when connected to the Areca ports. Are the L- shaped cables a standard size we can buy in a shorter length from any vendor?	2009
Q10030608 - My question is about the SAP application. It says in the manual that the password can be disabled by entering the old password and leaving the two new passwords blank. Unfortunately, version 1.0 and version 1.1 of the SAP application both do not accept a blank password. I get the message that the password cannot be blank. How can I disable the password?	2247

Q10010407 - I connect a newly purchased Hitachi SATA II harddisk (Model No. HDS728080PLA380) to the Areca PCI SATA ll RAID card, the ArcHttpci software reports that the Current and Supported SATA Mode of the harddisk is SATA150+NCQ(Depth32) but not SATA300.

3075

Q10010601 - Is it possible to update the PCI-X/PCIe adapter firmware through in-band without having connected any hard disk?

2168

Q10010604 - Do all the notifications have to use the built in ethernet to function correctly? Is there anyway, for example, to use "alert by mail" via actual server ethernet (not the areca ethernet).

2381

Q10010607 - We are running Linux and would like to use the Smartmontools to extract the smart data from Areca disks using the command line. Is there a way to do this with smartctl/smartd ? If not, can we do it any other way? The web interface cannot be scripted for monitoring purposes so we need a CLI tool.

2671

Q10010704 - Archttp gives detailed information on volume sets (including stripe size, cache mode, etc.) via http://192.168.1.11:81/vol0.htm. The CLI lacks this information, it only shows base volume sets information, including name, RAID-Level, capacity.

2515

Q10010808- In cli I only see an option to upgrade the firmware. How can I use cli to also flash the boot.bin and bios.bin?

1901

Q10020602 - I have a NAS application. The system need to have our brand in the McRAID manager. I have the VM tool for the external raid. But does Areca have the VM tool for the PCI-RAID card for branding.

2041

Q10030501 - ArcHttp detects no controller, is because there are no disks connected?

2952

Q10030601 - I bought an Arc-1170 PCI-X card. I have a question about the SATA cables. Areca provides L- shaped on one end and 2 of them sit over each other when connected to the Areca ports. Are the L- shaped cables a standard size we can buy in a shorter length from any vendor?

2009

Q10030608 - My question is about the SAP application. It says in the manual that the password can be disabled by entering the old password and leaving the two new passwords blank. Unfortunately, version 1.0 and version 1.1 of the SAP application both do not accept a blank password. I get the message that the password cannot be blank. How can I disable the password?

2247

Areca FAQ

Utility

Utility

Search

Most Popular