Skip to content
Skip to main navigation
Skip to first column
Skip to second column
Areca FAQ
At The Heart of Storage
Hardware
Hardware
Go
Reset
#
5
10
15
20
25
30
50
100
All
Items
Hits
Q10040812- What would be the problem if the card is giving a constant alarm?
1974
Q10010406 - How can I enable staggered hard disk spin up on the Areca PCI series controllers?
3211
Q10010409 - Can you please send me the pin definitions for the discrete Activity and Fail LED pins on your SATA II controller cards so that I can define some cables to use with our backplanes? Pin definitions, header size, and pitch size would be great.
8355
Q10010412 - When I boot from power up I always get 2 beeps from the 1220, than When I restart from windows I always get 3 beeps. This despite the fact that I have the beeper muted and alerts disabled. Is this normal? Is there a listing of what the # of beeps mean?
2992
Q10010610 - We have tried to connect multiple CF 4 cards using addonics CF to SATA adapters, but the 1260 BIOS claims that these CF drives are "failed", probably due to some detection issues on geometry or SMART lacking... So, we need a modified BIOS that can handle this hardware combination?
2172
Q10010908 - We have a problem with an ARC-1680LP and a SuperMicro Chassis with SAS Expander Backplane and 24x HUS154545VLS300 in it. We got in the logs an error called “E2Enclosure Temp Over Temp.” The Enclosure Temp is 39 ºC and the HDD Temp is 40 ºC.
1033
Q10020611 - I have the following drive attached. Everything seems fine except the temperature reported for this drive is -55C !!! All other drives are a different model and read the temperature correctly. Is it the firmware on the drive? Model Name: WDC WD2500JS-00NCB1 Serial Number: WD-WCANK1190107 Firmware Rev.: 10.02E01
2212
Q10020703 - We noticed that the ARC-1231/1261/1280/1280ML cards interface list two temperatures, one for the processor and the other one for the controller. What are the safe ranges for these temperatures?
2730
Q10020909 - I'm trying to use the ARC-1280ML controller in Windows 7 on Tyan S7025/ BIOS Version: 1.02 M/B board. The controller POST is normal and the controller driver installs normally in Windows. When trying to use a volume in Windows 7, accessing the Virtual Disk Manager is very, very sluggish. Formatting the volume is impossible (completely hangs the Disk Manager).
1043
Q10030406 - Which O/S (Operating System) will support X86 64-bit processors?
2585
«
Start
Prev
1
2
3
4
5
6
7
8
9
10
Next
End
»
Page 1 of 12
Knowledgebase
SATA PCI RAID Card
SATA PCI RAID Card Driver
RAID Subsystem Controller
External Controller
Search
Most Popular
Q10010409 - Can you please sen...
Q10160605 - what is the standa...
Q10250611 - Do you know when s...
Q10130407 - Is it possible to ...
Q10020409 - Can Areca PCI-X/PC...
Q10090406 - The boot device ca...
Q10150407 - Another issue abou...
Q10090608 - Wondering when dri...
Q10020407 - Is there any socke...
Q10120608 - When trying to ins...