Advanced search
367 search results
Page 4 out of 37 Pages
- 2014: Q10021404 - When removing any of the Seagate ST2000NM0033, and re-inserting it on ARC-1214 is
Answer: This is a compatible issue with Marvell ROC and has been fixed in ARC-12x4 firmware version 1.52 date: 2014-3-31 or later. This HDD works fine using the ARC-1213/1680/1882 controllers. ... - 2014: Q10091404 - Power up Supermicro CSE-216BE1C-R920LPB (12G expander chassis) system with an ARC-1883LP adapter, the
Answer: This is a compatible issue with Supermicro CSE-216BE1C-R920LPB and has been fixed in ARC-1883 firmware version 1.52 date: 2014-4-10 or later. ... - 2014: Q10101404 - RAID adapter firmware 1.52 build RAID volume is 0.1 GB smaller than 1.51fw.
Answer: Our 1.51 firmware supports stripe size up to 128KB. But 1.52 firmware supports stripe size up to 1024KB. This is a truncation base from the firmware ... - 2014: Q10111404 - ARC-1201 works on Windows Server 2012 R2. But the scsi command error message
Answer: This issue has been fixed in ARC-1201 firmware date: 2014-4-10 or later. ... - 2014: Q10121404 - Can I expand the capacity of the raid by hot swapping each drive
Answer: There has one additional Clone Disk function from firmware version 1.52. You can use this clone disk function to replace one by one. After you clone all ... - 2014: Q10131404 - I am not able to upgrade the 1.51 firmware to the recent firmware
Answer: Update firmware from 1.51 to 1.52 firmware must update FIRM file first, and restart machine once to be able update the BIOS code. You can ... - 2014: Q10011405 - ARC-1214 reports that ST4000VN000 Current SATA Mode is SATA150+NCQ (Depth32) but not SATA600+NCQ
Answer: Seagate ST4000VN000 6G SATA drive SC44 firmware manufacture current allowance speed default set on 1.5Gb/s even its capability=6Gb/s. This issue can be solved by manually configuring drives to ... - 2014: Q10021405 - ARC-1882 can not detect the ST4000VN000.
Answer: Seagate ST4000VN000 6G SATA drive SC44 firmware manufacture current allowance speed default set on 1.5Gb/s even its capability=6Gb/s. The PL firmware phase 17 or later can not work with ... - 2014: Q10031405 - ARC-1880IX-16-4G does not allow modifying the volume stripe size from 128K to 1024KB.
Answer: The old firmware (1.51 or early) volume capacity only supports stripe size up between 4KB and 128KB. Controller will keep the possibility of migrating the ... - 2014: Q10091405 - When upgrading the firmware of the ARC-1882X, I get the error “HTTP protocol
Answer: This issue may occur if we use 6.20.00.21 driver. There is no issue using ArcHTTP version 2.4.0 with driver 6.20.00.29 under Windows 7 and IE11. ...
The most popular searches are:
- firmware timed out⊂mit=Search (77359x)
- upgrading raid card⊂mit=Search (75867x)
- Greater Two TB Volume Support⊂mit=Search (55188x)
- Greater Two TB Volume Support (49930x)
- upgrading raid card (25903x)
- firmware timed out (21595x)
- hitachi failed drive⊂mit=Search (14299x)
- hitachi failed drive (14076x)
- upgrading+raid+card (13670x)
- Greater+Two+TB+Volume+Support (10844x)