Advanced search
360 search results
Page 7 out of 36 Pages
- 2010 to 2015: Q30021403 - Does TRIM support on Areca HBAs.
Answer: Areca 6Gb/s SAS HBAs support TRIM. ... - 2010 to 2015: Q30011407 - Is there any compatible issue using an ARC-1320 with AIC XJ3000-4603M 60 bays?
Answer: ... - 2010 to 2015: Q30011412 - Regarding SATA port multiplier support for the ARC-1320 HBAs, do those HBAs support
Answer: Arc-1320 HBAs support FIS-based switching. ... - 2011 to 2015: Q10051403 - How is the cable length used on first hop from 3008/3108 to expander?
Answer: The distance between the DUT and first expander is limited by the maximum round trip flight for a cable that will carry STP traffic is 20 dwords. The distance between the first hop from LSI SAS3008/SAS3108 to expander is limited by 6.3m for 12G and 12.58m for 6G assuming a cable with a propagation delay of 5.3ns/m. But the distance between the first expander and downstream expanders may be greater. There is no issue with SAS HDDs. ... - 2011 to 2015: Q10091403 - How is the cable length used on first hop from 3008/3108 to expander?
Answer: The distance between the DUT and first expander is limited by the maximum round trip flight for a cable that will carry STP traffic is 20 dwords. The distance between the first hop from LSI SAS3008/SAS3108 to expander is limited by 6.3m for 12G and 12.58m for 6G assuming a cable with a propagation delay of 5.3ns/m. But the distance between the first expander and downstream expanders may be greater. There is no issue with SAS HDDs. ... - 2011 to 2015: Q10191403 - Are 4TB drives supported on Areca RAID controllers?
Answer: Areca RAID controllers support over 2TB capacity since firmware version 1.49. You can use 4TB drives with firmware version 1.49 or higher. ... - 2011 to 2015: Q40011403 - Does SATA 1.5G support by ARC-8080/8008 external 12Gb/s SAS RAID controller?
Answer: SATA 1.5G does not support any more. ... - 2011 to 2015: Q40011407 - With an ARC-8068 (which has one volume on it) attached to a 9200-8e LSI
Answer: The issue is resolved by disabling the MPIO device in Device Manager, so it's related to MPIO. It has been fixed in firmware version 1.51 date: 2014-07-21. ... - 2011 to 2015: Q40011408 - Connecting an AIC XJ3000-4603M with 60 drives to an ARC-8007 RAID controller, the ARC-8007 only
Answer: ARC-8006/8007 firmware 1.52 date: 2014-07-21 or later can support both one SES and 3 SESs expander firmware from AIC JBOD XJ3000-4603M. ... - 2010 to 2015: Q50041403 - Does SATA 1.5G support by ARC-8028/8018 12Gb/s SAS expander module?
Answer: SATA 1.5G does not support any more. ...
The most popular searches are:
- firmware timed out⊂mit=Search (77611x)
- upgrading raid card⊂mit=Search (76155x)
- Greater Two TB Volume Support⊂mit=Search (55390x)
- Greater Two TB Volume Support (50112x)
- upgrading raid card (26080x)
- firmware timed out (21669x)
- hitachi failed drive (14528x)
- hitachi failed drive⊂mit=Search (14392x)
- upgrading+raid+card (13788x)
- Greater+Two+TB+Volume+Support (11218x)