Advanced search
236 search results
Page 20 out of 24 Pages
- 2018 to 2020: Q10051811 - I have 8 in a server that I am building, and the drives
Answer: ... - 2018 to 2020: Q10051901 - ARC-1224/5028T2 cannot recognize more than one D3-S4510 SSD drive. With 12x6 or 1883
Answer: ... - 2018 to 2020: Q10091903 - Is there any example to tell what look the alert would be when
Answer: Each drive manufacturer defines a set of SMART attributes, and sets threshold values beyond which attributes should not pass under normal operation. SMART values typically ... - 2018 to 2020: Q10101903 - Controller is showing “Incompleted” and RAID not showing.
Answer: The raidset status 'incompleted' is used to avoid unnecessary array degradation. The raidset status may become incompleted when there have one or more array member ... - 2018 to 2020: Q10011907 - For firmware version V1.51 2012-07-04, could you please clarify the below? 1. What
Answer: With 1.51 firmware, the maximum capacity per disk drive is 16TB and the maximum capacity per volume set is 512TB. ... - 2018 to 2020: Q10011910 - The Seagate Nytro 3031 series + 1884 controllers mostly all SSDs are detected
Answer: It is a hardware compatible issue between the ARC-1884ixl SAS processor and this SSD. The firmware version 1.56-20190911 has added the path to avoid this ... - 2018 to 2020: Q10011911 - Could you please provide us the official driver disk ISO for RHEL 8.0
Answer: Areca encounters problem on making the iso file for RHEL 8.0 using the method for 7.x. But you should able to install the driver via USB drive. The instructions can be ... - 2016 to 2020: Q40011807 - ARC-9200 firmware is not able to register the Hitachi Ultrastar 4U Data102 we
Answer: Controller firmware reserved resource is not big enough for the Hitachi Ultrastar Data102 4U 102 bay JBOD. Please update firmware to 1.55-2018-0619 or later for ... - 2016 to 2020: Q40011811 - ATTO Expresssas H1280 can not work with ARC-8380 SAS RAID subsystem. When we
Answer: For the ATTO HBA issue, please update the ARC-8380 firmware to version 1.55-20180705 or later. You can also run ATTO Config Tool to change the below ... - 2016 to 2020: Q50011907 - Can the 4036ML be daisy chained from a 4036, which is connected to
Answer: ARC-4036 can’t support drive mode on its external port. ...
The most popular searches are:
- upgrading raid card (29563x)
- upgrading raid card⊂mit=Search (7143x)
- firmware timed out⊂mit=Search (5767x)
- Greater Two TB Volume Support⊂mit=Search (5483x)
- firmware+timed+out⊂mit=Search (5378x)
- her coming of she coming (5011x)
- hitachi failed drive⊂mit=Search (3834x)
- hitachi failed drive (3613x)
- upgrading+raid+card (2283x)
- Greater+Two+TB+Volume+Support (1719x)
