Advanced search
354 search results
Page 35 out of 36 Pages
- 2021 to 2022: Q80062102 - ARC-8050T3U-6 Raid stopped working. Disk lights are cycling first red followed by blue
Answer: When ARC-8050T3U firmware is not properly started up, the LEDs will have this kind of behavior. This situation comes from the thunderbolt standby state corrupted. ... - 2021 to 2022: Q10082102 - The ARC-1203 CPU temperature of the RAID controller is high (70°C). I would
Answer: 70°C is a normal working temperature, because the temperature is core temperature. It is higher than environment temperature. Firmware hardware monitoring feature will alarm if ... - 2021 to 2022: Q80022103 - Does ARC-8050T3U RAID storage have any issue with Gigabyte Z390 Designare M/B?
Answer: ARC-8050T3U RAID storage is based on the Intel Thunderbolt TitanRidge JHL7440 Controller. But it has issue with Gigabyte Z390 Designare M/B that is based on Intel Thunderbolt ... - 2021 to 2022: Q10052103 - SATA Power Up In Standby does not seem to work with ARC-1883ix-24 and
Answer: ARC-1883 RAID adapter ROC PL library does not support PM2 function. SATA Power Up In Standby does not work on ARC-1883 series RAID adapters. ... - 2021 to 2022: Q10072103 - Samsung 980 Pro causes ARC-1886-6N2I RAID adapter "timeout" (300 s) at boot.
Answer: Samsung NVMe SSD 980 PRO has link issue when firmware version 1B2QGXA7 works under x2 mode. Update Samsung 980 PRO firmware from 1B2QGXA7 to 2B2QGXA7 can solve the issue. ... - 2021 to 2022: Q10012108 - Areca old firmware the Hardware Monitor page shows the temperatures of all installed
Answer: Areca newer cards no longer collect drive temperatures because SAS controllers support hundred devices, it will need much longer time to inquiry temperature from all drives, and another ... - 2021 to 2022: Q40012201 - ARC-1330 cannot detect the ARC-8042-12 volume using two SFF-8644 cables.
Answer: Two 4-lanes SAS ports on the SAS host adapter can be applied to the ARC-8042 RAID subsystem. ARC-8042 RAID subsystem firmware will assign as a wide port configuration to both ports. Choose the ... - 2021 to 2022: Q60012201 - ARC-1330 cannot detect the ARC-8042-12 volume using two SFF-8644 cables.
Answer: Two 4-lanes SAS ports on the SAS host adapter can be applied to the ARC-8042 RAID subsystem. ARC-8042 RAID subsystem firmware will assign as a wide port configuration to both ports. Choose the ... - 2021 to 2022: Q80022204 - When M1 Mac navigates certain files (large image files up to 3GB) in
Answer: Please temporary decrease the max command length to avoid system crash. In controller configuration page, the system configuration menu, there has a feature called 'Max Command ... - 2021 to 2022: Q10032207 - Supermicro AS-2014CS-TR is installed an ARC-1886-16i (Firmware 1.62) with Intel P4510 NVMes. The
Answer: Supermicro AS-2014CS-TR uses the SFF-8654 [8X] to SFF-8654 [8X] for the RAID and Backplane. SFF-8654 to SFF-8654 + NVME HBA (SuperMicro backplane) has compatible behavior ...
The most popular searches are:
- Greater Two TB Volume Support (39805x)
- upgrading raid card (17998x)
- firmware timed out (15662x)
- upgrading raid card⊂mit=Search (12009x)
- firmware timed out⊂mit=Search (11589x)
- Greater Two TB Volume Support⊂mit=Search (10505x)
- upgrading+raid+card (8879x)
- Greater+Two+TB+Volume+Support (7070x)
- hitachi failed drive (4496x)
- trim (3500x)
