Advanced search
360 search results
Page 34 out of 36 Pages
- 2021 to 2023: Q10052103 - SATA Power Up In Standby does not seem to work with ARC-1883ix-24 and
Answer: ARC-1883 RAID adapter ROC PL library does not support PM2 function. SATA Power Up In Standby does not work on ARC-1883 series RAID adapters. ... - 2021 to 2023: Q10062103 - Does the 1884 models still support RAID-Controller based "Full Volume Encryption" like the
Answer: No, ARC-1884 does not support full volume encryption because the processor does not support ROC encryption engine. The SED-Encryption feature is the only encryption function for the ARC-1884. ... - 2021 to 2023: Q60012103 - I have an iMac Pro with MacOS 11.2.3. I do video editing. Sometimes
Answer: I turned off the “Put hard disks to sleep when possible” option. That solved the problem of array disk spin down. Turning off “Put hard ... - 2021 to 2023: Q10012108 - Areca old firmware the Hardware Monitor page shows the temperatures of all installed
Answer: Areca newer cards no longer collect drive temperatures because SAS controllers support hundred devices, it will need much longer time to inquiry temperature from all drives, and another ... - 2021 to 2023: Q30012106 - Will Areca ARC-1330-8i support FSTRIM command for connected SATA SSDs in Linux OS
Answer: ARC-1330series HBA support FSTRIM command for connected SATA SSDs in Linux OS (openSUSE LEAP 15.2) environment. ... - 2021 to 2023: Q80022106 - ARC-8050T3U-12 is connected to Mac USB port using the USB cable. The computer
Answer: Archttp can not see the raid box through the USB instead of thunderbolt port. Archttp communicate to ARC-8050T3U through the Areca device driver but USB ... - 2021 to 2023: Q80012108 - When the 8050T3U-4 is plugged USB port and boots up right but there
Answer: For USB connections, you must have accessible volume before connecting the raid box to the host. USB is different from thunderbolt, you can not attach ... - 2021 to 2023: Q10012111 - M.2 NVMe MICRON 7300PRO x1 on ARC-1886-6N2I creates RAID0 and found that M.2
Answer: Due to this NVME did't support Common Clock mode, therefore it should be forced to SRIS mode on the RAID card. Please modify the corresponding clock configuration to SRIS mode. The corresponding clock configuration setting is available ... - 2021 to 2023: Q10022111 - Does ARC-1203-2i work to boot mirrored SSD in VMware versions 7.0u3 or 6.7u3?
Answer: To boot vsphere 7.0u3 or 6.7u3 from ARC-1203 raid volume, you have to install the system to raid volume. But in vsphere 7.0u3 or 6.7u3 default ... - 2021 to 2023: Q10012201 - The RAID 6 array using advanced format 512e drive is currently in degraded
Answer: The 4kn drives can be used in arrays with 4k block size only. Array will use 512b block size if you create volume with LBA64 mode. ...
The most popular searches are:
- firmware timed out⊂mit=Search (77356x)
- upgrading raid card⊂mit=Search (75864x)
- Greater Two TB Volume Support⊂mit=Search (55188x)
- Greater Two TB Volume Support (49924x)
- upgrading raid card (25881x)
- firmware timed out (21581x)
- hitachi failed drive⊂mit=Search (14299x)
- hitachi failed drive (14070x)
- upgrading+raid+card (13642x)
- Greater+Two+TB+Volume+Support (10834x)