Advanced search
462 search results
Page 39 out of 47 Pages
- 2016 to 2020: Q80051912 - With the ARC-8050, is it possible for my host to execute S.M.A.R.T. health
Answer: Smartmontools can support Areca RAID controller include ARC-8050. Please check the man page of smartcrl. There have specific parameters needed to be able to inquiry ... - 2018 to 2020: Q10012001 - One of my drives failed. I replaced it with a new drive but
Answer: You are able to see the progress of rebuilding in any manager console. You can also check the volume status to see if it is ... - 2018 to 2020: Q10032001 - We update OS CentOS 8.0 to 8.1, but boot is fail. Error Message
Answer: The problem is not older driver but the RHEL has removed kernel build-in driver from their kernel tree. Redhat team has removed a lot of ... - 2018 to 2020: Q10022002 - Can you advise please whether it is possible to boot from the ARC-1214
Answer: This RAID controller has UEFI BIOS. The default setting 'auto' will response bios code based on motherboard's inquiry. It will report UEFI BIOS when motherboard inquiries ... - 2018 to 2020: Q10022003 - After ARC-1883 updates the FW from V1.55 to V1.56 on the HP Server
Answer: It is a compatible issue between the new bios code and this machine. We had ever modified the bios code for Mac boot issue.You can carry out the update to FW ... - 2018 to 2020: Q10032003 - I was able to add the driver to windows, and I can see
Answer: You can see the post of raid card only if raid card works with legacy bios mode and the motherboard is configured to allow option ... - 2018 to 2020: Q10042003 - The Supermicro X11SCH-LN4F can not find the ARC-1203 after initialization.
Answer: The default setting of PEG Max link speed is Auto. The system will initial pcie to train the pcie link speed and capability during cold ... - 2016 to 2020: Q80051912 - With the ARC-8050, is it possible for my host to execute S.M.A.R.T. health
Answer: Smartmontools can support Areca RAID controller include ARC-8050. Please check the man page of smartcrl. There have specific parameters needed to be able to inquiry ... - 2016 to 2020: Q80022003 - If we connect the ARC-8050T3U-4 through USB-C the system recognizes the RAID but
Answer: Areca Thunderbolt T3U supports USB host from T3U but not T3.Please make sure you use correct cable, USB cable and thunderbolt cable have same form factor ... - 2018 to 2020: Q10012009 - The Supermicro X11SCH-LN4F cannot find the ARC-1203 after initialization.
Answer: The default setting of PEG Max link speed is ‘Auto’. The system will initial pcie to train the pcie link speed and capability during cold ...
The most popular searches are:
- firmware timed out⊂mit=Search (77325x)
- upgrading raid card⊂mit=Search (75819x)
- Greater Two TB Volume Support⊂mit=Search (55148x)
- Greater Two TB Volume Support (49914x)
- upgrading raid card (25871x)
- firmware timed out (21574x)
- hitachi failed drive⊂mit=Search (14266x)
- hitachi failed drive (14062x)
- upgrading+raid+card (13606x)
- Greater+Two+TB+Volume+Support (10833x)