Advanced search
367 search results
Page 29 out of 37 Pages
- 2018 to 2020: Q10041901 - The ARCHTTP Config opens in the Safari window but when I try to
Answer: ... - 2018 to 2020: Q10051901 - ARC-1224/5028T2 cannot recognize more than one D3-S4510 SSD drive. With 12x6 or 1883
Answer: ... - 2018 to 2020: Q10031903 - If disk sets to fail in the configuration, the ARC-1214 with the PCB
Answer: Since ARC-1224 uses the new flash chip from the PCB 2.0, please update the firmware to 1.56 2019/02/22 or later version for this workaround. ... - 2018 to 2020: Q10041903 - Does ARC-1883 series support error injections to simulate SMART errors?
Answer: ARC-1883i uses SAS analyzer and external target mode firmware such as ARC-5020 to generate error injections to simulate SMART errors. ... - 2018 to 2020: Q10061903 - ARC-1224-8i Ver2.0 cards downgraded to the firmware 1.54-2017-03-08, it causes the Motherboard video
Answer: Since ARC-1224 uses the new flash chip from the PCB 2.0, it cannot accept the firmware old that the firmware version 1.55 date: 2018/02/20. You ... - 2018 to 2020: Q10101903 - Controller is showing “Incompleted” and RAID not showing.
Answer: The raidset status 'incompleted' is used to avoid unnecessary array degradation. The raidset status may become incompleted when there have one or more array member ... - 2018 to 2020: Q10011905 - The 1.56 firmware makes my DELL r720 unbootable - it stuck on "initializing
Answer: We had modified the bios code to fix compatible issue with some supermicro boards. This modification may be not compatible with DELL r720.To avoid similar ... - 2018 to 2020: Q10011907 - For firmware version V1.51 2012-07-04, could you please clarify the below? 1. What
Answer: With 1.51 firmware, the maximum capacity per disk drive is 16TB and the maximum capacity per volume set is 512TB. ... - 2018 to 2020: Q10021908 - What is the maximum HDD capacity of Areca RAID controller’s firmware?
Answer: The maximum capacity of HDDs for Areca RAID controller’s old version firmware supports up to 16TB capacity. From firmware version V156-20190124, it can support drives with up to ... - 2018 to 2020: Q10041908 - Can you have a special firmware to disable the “Volume Encryption” and “SED”
Answer: From firmware version V156-20190730, Areca firmware has added the “DisblzEncrptonP” hidden function on the "Rescue Raid Set" to disable all volume encryption and SED features. ...
The most popular searches are:
- firmware timed out⊂mit=Search (78241x)
- upgrading raid card⊂mit=Search (76220x)
- Greater Two TB Volume Support⊂mit=Search (55433x)
- Greater Two TB Volume Support (50131x)
- upgrading raid card (26690x)
- firmware timed out (21679x)
- hitachi failed drive (14537x)
- upgrading+raid+card (14450x)
- hitachi failed drive⊂mit=Search (14426x)
- Greater+Two+TB+Volume+Support (11221x)