Areca FAQ System - powered by phpMyFAQ 2.8.22

Advanced search

213 search results

Page 15 out of 22 Pages

2014: Q10031410 - Two Bad drives: Hus724040ale640 connected to Areca 1882X, can’t power on server and
Answer: This issue has be fixed into firmware 1.52 date: 2014-09-11 or later. ...
2014: Q80011411 - Areca 5026 with 4 Samsung 840 SSDs issue happens directly after creating a
Answer: ARC-5026 slot 3 and slot 4 come from a port multiplier chip. There has one bug on Samsung 840 SSD firmware that can not accept the no-zero port ...
2014: Q80011412 - I upgraded the ARC-5026 firmware to V1.52 2014-10-01 to resolve an issue with
Answer: This issue has been fixed in firmware version 1.52 date: 2014-11-11 or later. ...
2014: Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed
Answer: The problem is that the drive is not initialized, so it does not carry overwrite-repair action on factory bad bock and cause the read errors. First, you ...
2016: Q10041602 - Is it possible to boot from 4k native on Areca RAID controller?
Answer: Firmware version 1.53 date: 2016-02-16 or later has included 4K native booting support, when 4k native drives were used. ...
2016: Q10041602 - Is it possible to boot from 4k native on Areca RAID controller?
Answer: Firmware version 1.53 date: 2016-02-16 or later has included 4K native booting support, when 4k native drives were used. ...
2016: Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled"
Answer: Some hard drive firmware does not flush data in internal cache while idle. In this condition, the cache data from the RAID controller will not ...
2016: Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled"
Answer: Some hard drive firmware does not flush data in internal cache while idle. In this condition, the cache data from the RAID controller will not ...
2016: Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled"
Answer: Some hard drive firmware does not flush data in internal cache while idle. In this condition, the cache data from the RAID controller will not ...
2016: Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled"
Answer: Some hard drive firmware does not flush data in internal cache while idle. In this condition, the cache data from the RAID controller will not ...

The most popular searches are: