Q10071112 - RAID volume over 2TB capacity cannot be recognized after we install the RAID driver during XP installation.


Due to the windows system limitation, Windows XP only supports MBR disk format, the MBR disk format cannot support the hard drive capacity more than 2TB.

If you want to boot up from an over 2TB Areca RAID volume, below three conditions must be required:

1. Windows Vista x64 SP1 or Windows 7 64bit.

2. EFI BIOS for Areca RAID adapters and M/B.

3. GPT disk format.

There are some information about the GPT from the following link:

 

http://support.microsoft.com/?scid=kb;en-us;946557&x=9&y=7

http://www.microsoft.com/whdc/device/storage/GPT_FAQ.mspx

Tags: BIOS, boot, drive, driver, install, RAID, Vista, Windows, Windows 7, XP
Last update:
2015-08-25 04:17
Author:
Simone
Revision:
1.1
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Records in this category

Tags