Areca FAQ System - Q80031405 - Does the ARC-5026 support a battery backup from the RAM cache?

Q80031405 - Does the ARC-5026 support a battery backup from the RAM cache?

ARC-5026 does not support a battery backup from the RAM cache.

Tags: ARC-5026, backup, battery, RAM

Last update:: 2016-02-16 04:05
Author:: Simone
Revision:: 1.0

You cannot comment on this entry

Records in this category

Q80011401 - I am booting Mountain Lion 10.8.5 from a RAID 0 volume on Areca RAID adapter. I upgrade to Mavericks (10.9) and run the installer and the system reboots, the installation hangs at the startup screen and I have to manually reselect Mountain Lion as my startup volume.
Q80011402 - When I connect 8050 to ASUS Z87 deluxe/quad, 8050 will start up but then no response after scan all hard drive and nothing on the LCD front panel.
Q10121403 - Flashing disk drives attached to an Areca RAID controller.
Q10131403 - Locate and identify drives in an enclosure or backplane with Fault/Activity LEDs.
Q10181403 - How to rebuild a degraded RAID set on a SATA or SAS RAID controller?
Q10191403 - Are 4TB drives supported on Areca RAID controllers?
Q80011403 - ARC-8050T2 can not work on MacBook Air with OSX 10.7.5, but New Mac Pro is ok.
Q80021403 - I just bought an ARC-8050T2. How to set encrypt data using the full volume encryption.
Q80031403 - ARC-8050 manual says that the files of the firmware-update are labeled as ARC-8050NNNN.BIN, but the download files of the firmware package are labeled ARC-1882NNNN.BIN. Are these nevertheless the correct files?
Q80041403 - I used a Mac mini (late 2012, so with "just" thunderbolt 1 technology) with Mac OSX 10.8.5. I just installed only the driver. Everything was fine, but when the Mac goes to sleep (or I call it hibernate) the areca tower is restarting/rebooting every 1 minute until I wake the Mac up.
Q80051403 - Installing Windows Server 2012R2 on a Mac Mini with bootcamp drivers 5.1.56.21 connecting to an ARC-8050. Randomly, the RAID-6 array is apparently removed while the system is still running (Event ID 29 from source arcs_a64 : "Areca RAID Volume removal")
Q80061403 - I can not access a new encrypted volume on ARC-8050T2.
Q80071403 - Is there any performance drop with encrypted volume on ARC-8050T2?
Q80011404 - Can I install Windows 7 on ARC-8050T2, and boot from ARC-8050T2?
Q80021404 - Does Linux support for ARC-5026/ARC-8050T2?
Q80031404 - Opening the 'ArcHTTP64', however I am unable to find the 'ARC-5026 Web Management' tab or button.
Q10141404 - Is there a MRAID installer that doesn’t require Java for Mac OS X?
Q80041404 - Is there any information about the level of DB (decibel) of ARC-5026?
Q80011405 - HP Z420 computer can not detect ARC-5026 USB 3.0 during boot up. ARC-5026 switches on and off shortly while the Z420 boots up.
Q80021405 - Is the Areca ARC-8050 compatible with 220v 50 Hz?
Q80031405 - Does the ARC-5026 support a battery backup from the RAM cache?
Q80041405 - Does ARC-8050T2 support Optical thunderbolt cable?
Q10061406 - I have set "Alert By Mail Configuration" and configured: Send Only Urgent Event. However, I am receiving emails with subject "RaidAlert-WARNING".
Q80011406 - Is there any information about the level of DB (decibel) of ARC-8050T2?
Q10011407 - Is there a problem with a 4KN drive or can I only use hard drives with 512E support sectors?
Q60011407 - On Areca Desktop Box, will the Seagate STBD6000100 6TB drive fit your drive sled without modification?
Q80011407 - Can’t get the 8050T2 to connect to the Z97 motherboard, all the lights come on the 8050T2 but nothing on the front display.
Q80021407 - Seagate 12Gb/s SAS ST6000NM0014 Drives will not be detected on ARC-8050T2 Storage.
Q80031407 - Since updating my 2013 Mac Pro OS to 10.9.4, I get a kernel panic on startup when my 8050 enclosure is attached via Thunderbolt.
Q10011408 - How to solve the problem with reads stalling that causes by out of order command completion.
Q10031410 - Two Bad drives: Hus724040ale640 connected to Areca 1882X, can’t power on server and time out after 300secs.
Q10041410 - ARC-1882ix-12 can not recognize in Windows 2008R2 device manager when put into Asus m/b P8P67 WS revolution. Other m/b works fine.
Q80011410 - I have the ARC-5026 plugged into the USB port of a CalDigit FASTA-6GU3 Pro. The ARC-5026 powers off but does not power on again when I power on the computer from sleep mode.
Q10061410 - Does Areca firmware have day/time to program the Volume Check Scheduler?
Q10071410 - I'd like to know how to set and keep the clock settings for the PCI e RAID controller without using NIC. Everytime I look at the event log, the times are off, thus making the logs useless.
Q80021410 - When your driver for the Areca 8050 Thunderbolt RAID will be available for OS X Yosemite?
Q10021411 - Mac OS X Disk utility sees the new creation volume but doesn't allow any operation (erase or partition).
Q80011411 - Areca 5026 with 4 Samsung 840 SSDs issue happens directly after creating a Raidset. Slot 3 is getting Failed Status immediately but the SSD is healthy and OK.
Q80011412 - I upgraded the ARC-5026 firmware to V1.52 2014-10-01 to resolve an issue with the fans being too loud. Fans are quiet now, but now I cannot mount drives via USB.
Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed function.