If you would like to re-use an array member, all you need to delete the raidset configuration in this drive as free and assign this free drive a hot spare disk. You can find the delete raidset function and create hot spare disk function in raidset function menu. If you do not want to delete RAID set and assign it a hot spare, you can set the “Hot Plugged Disk For Rebuilding” to “Always” in the web browser manager. It always triggers a rebuilding for the Degraded RAID set/Volume.
Tags: drive, hot spare, raidset, rebuilding- FAQ Home
- All categories
- SATA/SAS PCI RAID Card
- Mezzanine Board
- SAS Non-RAID Adapters
- External RAID Controllers
- JBOD/Expander Box
- Desktop RAID Subsystem
- Internal RAID Rack
- Thunderbolt Solutions
883480 users online | 883478 Guests and 2 Registered
Q10041701 - One of my hard drives accidentally got disconnected. I plugged the drive back in, but now array shows degraded. How do I reset the RAID set to normal from degraded?
- Last update:
- 2017-01-19 05:09
- Author:
- Simone
- Revision:
- 1.1
You cannot comment on this entry






Records in this category
- Q10011701 - Can we put the ARC-1883ix into Dell PowerEdge R730?
- Q10021701 - HP Z800 workstation hangs at boot (after POST, before OS load) if bootable device is not the only volumes connected to 1882i.
- Q10031701 - Is there a driver available for windows server 2016?
- Q10041701 - One of my hard drives accidentally got disconnected. I plugged the drive back in, but now array shows degraded. How do I reset the RAID set to normal from degraded?
- Q10011702 - ARC-1220 cannot update the firmware 1.39 to 1.49 via DOS utility (nflash).
- Q10021702- ARC-1883 set to JBOD mode, after removing a disk, it would not beep.
- Q10031702 - CLI 1.14.7 shows for ARC-1883CAP-FBM only "22% loaded" instead of «charged (18.4V)».
- Q10041702 - Our custumer is running Supermicro X9DRL-iF (BIOS 3.0a) und Areca-1883 (Firmware 1.54 - 2016-11-23), booting hangs at Supermicro BIOS Message B2.
- Q10051702 - X9DR3-F (BIOS 3.2a) server will not start with ARC-1883i firmware version = V1.54-20161123, if there are two or more Volume Set. With 1 Volume Set server starts without problem.
- Q10011703 - Every time hot swap WD gold drive (WD4002FYYZ) drive on ARC-1203-8i, all other drives will be kicked out.
- Q10021703 - ARC-1883ix cannot see any HDD when HGST JBOD 4U60 is set as SES mode.
- Q10031703 - Areca RAID Hierarchy shows disk drive numbering different from “Drive Location” label on the HGST JBOD 4U60.
- Q10011704 - Does ARC-1883x support a raid over 100TB?
- Q10021704 - When ARC-1883LP RAID6 with Blackmagic Ver 2.11 in Write through mode, Read is 0 MB/s. Write is at 224.3 MB/s.
- Q10031704 - How can I clear the ARC-1264il-16 internal drive serial numbers as "failed"?
- Q10041704 - Supermicro X10SLQ-L will stuck at the BIOS Screen, won’t continue to boot, if there are more than Areca volumes.
- Q10051704 - Areca CIM provider can not report failed disks and/or controller failure or battery failure to VMware vSphere client.
- Q10061704 - Is it possible to monitor the ARC-1882i via SNMP without Traps?
- Q10071704 - Does ARC-1883x controller work with Dell OptiPlex 990?
- Q10081704 - Is this controller use the LAN port on the adapter for management, monitoring and alerts, why was created also the CIM Provider for VMWare?
- Q10091704 - Customer has base supermicro system with 4 working 24bay jbods from AIC. If he connects a fifth chassis some drives get timeouts.
- Q10101704 - Could you please show me how to reset binding IP in the Archttp?
- Q10111704 - What’s the RAID card queue length number of ARC-1883i/x-12?
- Q10121704 - Does ARC-1883 support vSAN ?
- Q10131704 - Trying to setup PCIe RAID controller SMTP alerts to send alerts, and use the Generate Test Event to test it, but I never get an alert.
- Q10141704 - What’s difference between Archttp and ArcSAP?
- Q10011705 - Do you have an updated version of your Windows API that is compiled against the .net 4.5 libraries, or built using a more recent visual studio?
- Q10021705 - When I connect both Primary and Secondary expanders to ARC-1883x, I see each HDD twice.
- Q10031705 - ARC-1882P volume set will be created using Intel S3510 SSD but it takes much longer and cause the API time out.
- Q10041705 - ARC-1203-2I RAID volume is not detected by Acronis to load image.
- Q10051705 - What is the maximum safe temperature for the CPU on the ARC-1883 controller card?
- Q10061705 - ARC-1882ix is enabled the "Schedule Volume Check" on a time regular base. But everytime the server did a reboot (update) the volume check begin.
- Q10071705 - Do current GA versions of vSphere and VSAN support 4K Native drives?
- Q10011706 - Firmware V1.54 2016-05-13 Alarm By Mail function sends incorrect day of week.
- Q10021706 - ARC-1880i will not boot if there have more than 1 raid array defined.
- Q10031706 - When the Intel SP1200SPS M/B boots up the ARC-1201 card, the RAID adapter BIOS spits out this error "F/W Detected Unknown Error".
- Q10041706 - ARC-1264iL have time-out and drop drive issue on FW:V1.54 2016-11-23 and WD6002FRYZ.
- Q10051706 - When trying to boot from Intel M/B S1200SPLR and ARECA ARC-1203-8I get F/W DETECTED: ***Unknown error.
- Q10061706 - When trying to boot from Intel M/B S1200SPLR and ARECA ARC-1203-8I get F/W DETECTED: ***Unknown error.
- Q10011707 - Currently cli.exe shows not a supported 64-bit Windows PE 10.x operating system.
- Q10011708 - Is there an update for the non working "Power Up In Standby" (PUIS) command in the Firmware?
- Q10011710 - Does the Areca SED function support conform to the Trusted computing Group specifications Opal, Enterprise or both?
- Q10021710 - OS is unable to load from an Intel S2600WT 2600WT main board with an ARC-1882IX-12 and an ARC-1203-2I.
- Q10031710 - Tried to install mraid-20170811 on MAC OS 10.13 (High Sierra) and the Installer status bar remains stuck.
- Q10011712 - Current Arcmsr Linux source fails build on 4.9.54-gentoo mainline.
- Q10052009 - We use a ARC-1882i in JBOD mode and i noticed that it does not presents enclosure/slots to the system.
Tags
12Gb/s SAS expander 4KN drive Acronis Advanced Data Mirroring AJA Alert By Mail Configuration ALUA AOC API ARC-1035 ARC-1130 ARC-1200 ARC-1201 ARC-1202 ARC-1203 ARC-1203-2I ARC-1210 ARC-1212 ARC-1213 ARC-1213-4i ARC-1214 ARC-1214-4I Arc-1214-8I ARC-1220 ARC-1221 ARC-1221x ARC-1222 ARC-1223 ARC-1223-8i ARC-1223-8X ARC-1224 ARC-1224-8I ARC-1225-8I ARC-1230-8x ARC-1231 ARC-1231Ml ARC-1260 ARC-1261ML ARC-1264il-12 ARC-1264il-16 ARC-1280 ARC-1280ML ARC-12x3 ARC-12x4 ARC-12x5 ARC-12x6 ARC-1300 ARC-1300-4e ARC-1300-4i ARC-1300ix-16