Areca FAQ System - Q80042209 - When the multiple ARC-8050T3U-12E are connected in series on the M1 mac studio system, sometimes it does not recognize the secondary one, and only first one can be seen in the management interface.

Q80042209 - When the multiple ARC-8050T3U-12E are connected in series on the M1 mac studio system, sometimes it does not recognize the secondary one, and only first one can be seen in the management interface.

Update the firmware to V1.64 2022-09-15 or later version for this workaround.

Tags: ARC-8050T3U-12E, firmware

Last update:: 2022-09-17 14:21
Author:: Simone
Revision:: 1.1

You cannot comment on this entry

Records in this category

Q80012102 - Is there a method to get the debug message from web browser console?
Q80022102 - When Mini M1 powers up with ARC-8050T1/T2, ARC-8050 may take a period of time to complete the initialization. If the initialization time is greater than M1 watchdog timeout, it will cause the MAC M1/Pro panic and repeatedly restart.
Q80032102 - Is Apple silicon based Macs able to boot off Areca Thunderbolt RAID storage?
Q80042102 - Is there a way to config the ARC-8050T3U-6 installed 6 HDDs to recognize each HDD separately within my OS?
Q80052102 - ARC-5028T2 6 bay seems to stick in reboot cycle. When the unit was restarted, it now goes into a reboot loop.
Q80062102 - ARC-8050T3U-6 Raid stopped working. Disk lights are cycling first red followed by blue and continue this cycle.
Q80012103 - ARC-8050T3 Thunderbolt 3 RAID Storage it is not able to use Mac Book Pro M1 Editon. Please suggest any patch to update
Q80022103 - Does ARC-8050T3U RAID storage have any issue with Gigabyte Z390 Designare M/B?
Q80032103 - Areca ARC-8050T3-24R storage units wont boot up when Dell 7820 and Dell 7920 PC is booting. The LED's become red and the storage is not appearing in Windows as disc partition. The only solution is to power off PC and then when Areca after power off the physically pull off the TB cable from Storage and then plug it again.
Q80042103 - When iMac with MacOS 11.2.3 is in sleep mode, the ARC-8050T3 Raid storage is powering on every hour at the events log.
Q80012106 - I have an ARC-8050T3U that I am trying to connect to a Thunder 3 port on a Windows 10 MSI motherboard - Z490i (Corsair) computer. When I can get it connected, usually through a hot plug event, it works great. If I reboot the computer, I lose the connection.
Q80022106 - ARC-8050T3U-12 is connected to Mac USB port using the USB cable. The computer recognizes the volume but arcHTTP cannot see it. In addition to that, the read/write speeds are topping at 41mbs.
Q80032106 - There is a ARC-8050T3-12R array. Press and hold the switch, the array starts, but there is no display on the LCD screen, and the red light of the array hard disk flashes.
Q80012108 - When the 8050T3U-4 is plugged USB port and boots up right but there is a warning message with exclamation mark showing up in Windows.
Q80012111 - Can not upgrade the latest driver/utility in install-mraid-20201224-BigSur.dmg Mac Pro 6,1 (2013)running Mac OS Catalina 10.15.7.
Q80012204 - The arcHTTP64 script invokes usr/lib/python, which is not implemented anymore in macOS 12.
Q80022204 - When M1 Mac navigates certain files (large image files up to 3GB) in Finder a kernel panic occurs and the system crashes. There is no issue at all using Intel machines with the same data.
Q80012206 - I just upgraded to the new M1 Mac Studio Ultra running Mac OS Monterey. The ARC-8050T2 drives will mount but I can't seem to log into them and manage the raid or JBODs.
Q80012207 - Macs M1 can work with ARC-8050T3U-12E external port Tape drive, but Tape drive can not work under Intel Macs.
Q80022207 - ARC-8050T3-24R works just fine on Intel iMac pro, but it won’t boot up with new Mac studio m1 max. M1 Mac can start up the controller if no drives connected.
Q80012208 - Can HDMI monitor work with DP port on the back of my Areca 4bay T3 with a DP/HDMI cable and eliminate the need for an external signal converter?
Q80022208 - Can Dell Precision 7920 Tower computers recognize the ARECA ARC-8050T3U-8?
Q80032208 - Apple keeps telling me that kernel extensions will not be supported in the future. What is the plan for ARC-8050T3U support on MacOS 13+?
Q80042208 - When I shutdown the MacPro7,1 installed ARC-1886-4N8I with 4x MTF-7300PRO-1920M2 NVMe SSD, it will reboot by itself with following message: "Power Off timed out in phase 'Notifying power plane drivers'. Total 30000 ms: vfs_unmountall: 846 ms".
Q80052208 - Hyper terminal connects to ARC-8050T3U, using port 992, get halted all the time, how to make connection?
Q80012209 - ARC-8050T3U-6 has been stuck in a "Volume State: Need Init" state for over a week. How does the drives initialize?
Q80022209 - ARC-8050T3U-12 shows "Need Init" and "Initializing" for over 48 hours. RAID Volume is not visible on MacOS.
Q80032209 - The ARC-8050T3-16R unit does not start up when hooking up the thunderbolt cable to Mac. All the HDD lights flash red on the front and front LED display is blank, on the back of the unit the control card is also flashing a red fault light.
Q80042209 - When the multiple ARC-8050T3U-12E are connected in series on the M1 mac studio system, sometimes it does not recognize the secondary one, and only first one can be seen in the management interface.
Q80012212 - Running Monterey 12.6 on an M1 Studio Ultra, ARC-8050T3-24R gets stuck in an infinite boot loop. If I remove the thunderbolt cable from the M1 Studio, allow the computer to fully boot up and log in, then plug the cable in I have no issue mounting it.
Q80022212 - Running Ventura on M1 Studio, the computer is restarting every time it wakes up from sleep attached with ARC-8050T3U-4/4A.
Q80032212 - Will ARC-8050T2 and 8050T3U-8 be compatible with MacOS Ventura update?
Q80012301 - What is the power input range of the ARC-8050T3/T3U series Thunderbolt RAID storage?
Q80012305 - Firmware version 1.67 deletes old version firmware NTP /SNMP/ Alert By Mail configuration all entered numbers and the user needs to fill in everything again.
Q80022505 - Intel-based Mac panic when shutdown if Samsung PM1643A SAS SSD is used. PM1643a needs 6~7 seconds for stop unit command, but MAC watchdog timeout will be triggered for about 2~3 seconds.