Questions in 2024
- Q90022410 - Supermicro X11DPH-T will hang at boot POST on ARC-1886-4X12I with firmware 1.70, even without any disk attached. Tried: auto, legacy, uefi no difference, all hangs at counting the seconds, either hang at “0” or “5” seconds.
(132 views) - Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.
(129 views) - Q90052408 - The Hyper-V PCI CentOS 6 hv_pci driver cannot handle ARC-1886 RAID adapter. But ARC-1883 works well.
(398 views) - Q90042408 - Intel MAC via Thunderbolt 3 to ARC-1686 or 1886, the revision / firmware # of the device shows as "R001" regardless of what the device is.
(214 views) - Q90032408 - ARC-1886-16i with 15 SATA SSD in CSE-M28SAB Supermicro bays can detect all Kingston DC600M 7.68TB SATA SSD 15 disks when they are free. “Trim” after creating volume, two drives dropped.
(182 views) - Q90022408 - After installation of the ARC-1686-4NOD into our HPE ProLiant DL385 Gen10 Plus server and rebooting, the server always boots straight into McBIOS instead of booting the installed OS.
(244 views) - Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.
(229 views)