Areca FAQ System - Q10111501 - The RESCUE raid set goes missing again after we reboot the raid set again.

Q10111501 - The RESCUE raid set goes missing again after we reboot the raid set again.

RESCUE command does not record the result into drives and disappear after reboot.

SIGNAT command is used to write the rescue result back into these array members. You should execute SIGNAT only if you confirm the result correctly.

Tags: Q10111501

Last update:: 2015-04-29 05:39
Author:: Simone
Revision:: 1.0

You cannot comment on this entry

Records in this category

Q10011501 - Are ARC-1680 series RAID adapters compatible with ARC-8028 12Gb/s SAS expander?
Q10021501 - Does Areca RAID controller-1882ix support bootable from 4KB volumes?
Q10031501 - After enabling ARC-1883 “SATA Power Up In Standby “ with Adata’s SX900, a power down, and a new power up reports “failed disk”.
Q10041501 - Windows XP 64-bit systems blue screen is pointing to the storport.sys file. In the memory dumps, we are seeing the following: FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_NULL_IP_storport!RaidpAdapterDpcRoutine+53 ExceptionAddress: fffff88001106c3d (storport!RaUnitAsyncError+0x000000000000013d)
Q10051501 - Does ARC-1880 support RAID00 or RAID100?
Q10061501 - When Intel S5520HC boots and RAID firmware (2014/9/14) is initializing encryption volumes, BIOS displays a warning "The above volume is not in normal state”.
Q10071501 - ARC-1882ix-12 reports SSD as "failed" and not free when Adaptec ASR-7805 formats Samsung 840 EVO and erases it again.
Q10081501 - How do we identify slow hard disk on Areca RAID Controller?
Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?
Q10101501 - Is Supermicro X10DRL-TC compatible with ARC-1883 RAID adapter?
Q10111501 - The RESCUE raid set goes missing again after we reboot the raid set again.
Q10121501 - How can we update the on-board expander firmware on the ix series RAID adapters?
Q10131501 - Is the Chenbro CK23601 6Gb/s SAS expander compatible with ARC-1882IX?
Q10141501 - I was getting aprox. 450 MB/s read speed and now performance has dropped drastically to 200 MB/s using HP Z820 workstation with ARC-1214-4i RAID controller.
Q10151501 - ARC-1224-8i RAID controller with Supermicro X10DRG-Q in slots 9 (PCH slot) under Win7 Pro x64, the option ROM for the card doesn't load and can't boot from it.
Q10161501 - One of disk raid appears as free, the controller couldn't rescue the raid set.
Q10171501 - Can we directly install of ARC-12x4 with Ubuntu Server 14.04.1 LTS?
Q10181501 - Where can we get driver sources to create the driver with Citrix XenServer Driver Development Kit?
Q10011502 - When the ARC-188X's driver for FreeBSD would be available?
Q10021502 - When the ARC-1214's driver for FreeBSD would be available?
Q10031502 - After enabling ARC-1883 “SATA Power Up In Standby “ with WD HDD, a power down, and a new power up reports “failed disk”.
Q10041502 - After enabling ARC-1882 “SATA Power Up In Standby “ with Adata’s SX900, a power down, and a new power up reports “failed disk”.
Q10051502 - Roaming 3Gb/s SATA HDD from ARC-1680 to ARC-1883ix-24 Raid Controller, the new ARC-1883 does not "see" any of this drives connected.
Q10061502 - Windows refuses to install and shown "Windows cannot install in such a drive" in an Intel M/B S2600CW2 + ARC-1214.
Q10071502 - Is Supermicro X10SAT compatible with ARC-1882ix machine?
Q10081502- ARC-1883i connects with two expanders inside DataOn storage CIB-9470 70 bays JBOD. But one expander, all HD showed up. However, another expander only show 4 x HD with odd name “smpDev #1-4”
Q10091502 - Brand new Samsung 850 Pro 1TB SSD's are being detected as "FAILED" by the Areca Controller.
Q10011503 - Would like to know the correct way to configure the ARC-1883 email notifications.
Q10021503 - ARC-1213-4i is unable to upgrade from 1.50 to 1.52 with the error "Invalid BIOS Data".
Q10031503 - What is the max CPU Temperature of an ARC-1212 or at which temperature it starts to log and throttle?
Q10041503 - When we use an Intel mainboard S2400SC with Xeon V1 processor the ARC-1882 card is communicating a PCIe 2 speed on a PCIe 3 slot.
Q10051503 - ARC-1214 tested with slots 8, and 10 on the Supermicro X10DRG-Q booting Win7 Pro x64 normally, but would show a WHEA PCI root port error in the event log.
Q10061503 - ArcSAP utility can’t start because MSVCP100.dll is missing in Win2012R2.
Q10071503 - Have Areca RAID cards supported the encryption function?
Q10081503 - When user inserts multiple RAID adapters in a server, Archttp display same name “ARC-xxxx Web Management” for different devices. User confuses to choose any storage through Archttp to administrate those different storages.
Q10011504 - ARC-1200 is operating in RAID-1. At the moment ARC-1200 has two same name raid sets: Degraded and Incompleted. How to verify which HDD contains the active raid?
Q10021504 - SanDisk X300s will be shown as Failed and cannot be used.on ARC-1882i.
Q10031504 - ARC-1883i RAID adapter can't show bios message when we put into Motherboard X7SBE.
Q10041504 - Do any of the current Areca RAID cards support trim for SSD's?
Q10011505 - Areca cli Tool dies with segement fault on RHEL 7.1. Error: Please check the (arcmsr & sg) drivers are installed properly.
Q10021505 - ST4000NM0033 Seagate enterprise HDD can’t pass self test of ARC-1883ix-16 shown randomly fail, when system powers on.
Q10031505 - Does ARC-1883X support both DualPaths and MPIO for dual SAS expanders?
Q10011506 - Does smartmontools interact with SAS devices on Areca RAID controllers?
Q10021506 - After upgrading ESXi host from 5.5 to 6.0, only one/first Areca controller is claimed by driver/OS.
Q10031506 - If 1883i and 1883LP enabled “SES2 support” on BPN-SAS2-826EL1 backplane, then, reboot will generate error message “E2 unknown power error”.
Q10011507 - After install of the mraid driver and cli and archttp utilities, do I need to have Java installed anymore?
Q10021507 - Will there be win 10 drivers for Areca 1882ix?
Q10031507 - ARC-1883i Controller cannot boot from Intel R1304GZ4GC Server platforms
Q10041507 - Under CentOS 7.1, the "cli64" command throws an error claiming that the (arcmsr & sg) drivers are installed properly.
Q10011508 - ARC-1214 stuck after restart with Restore of Acronis.
Q10021508 - RAID controller just shows “need init”, and not starting the initialization.
Q10031508 - ARC-1883i controller cannot boot from Intel S2600CW Server platforms.
Q10041508 - Does Areca RAID adapter support the new WD 5TB/6TB HDD firmware update function code about 5MB in size?
Q10011509 - Does Areca RAID adapter support write back cache with battery backed RAM on JBOD disks or passthrough disk?
Q10011510 - Is it possible to enable the Areca RAID controllers encryption function on the boot volume?
Q10021510 - Is the encrypted volume option available with the 16 volumes?
Q10031510 - The MRAID installer can not work on new installs of the MRAID and Mac OS 10.11.
Q10041510 - Will Areca RAID controllers support "volume check" on the RAID 1 array?
Q10051510 - Z87X-SOC board BIOS F10c initializes the ARC-1882i consistently when it is installed.
Q10061510 - Samsung SSD 850 PRO 1TB Firmware Version = EXM02B6Q drives are showing "Time Out Error".
Q10071510 - Is there any way to create a 512 byte block size volume with 4096 byte block size?
Q10011512 - One SSD Disk fails in the ARC-1883i Raid Set a while in usage. After changing the Disk, it fails after a few hours again.
Q10021512 - How to fix the ArcHTTP infinite loop login with Microsoft Edge Browser?
Q10011601 - Smartmontools can not interact with SAS devices on ARC-1224 RAID controller.
Q10021601 - Is there a difference between ArcHTTPGUI and ArcHTTPSrvGUI?
Q10031601 - Does Areca driver set the SCSI command timeout to 60 seconds running CentOS 5.5?
Q10041601 - Which Linux driver source has included the ARC-1203 series adapter?
Q10051601 - Which Linux kernel has included the ARC-1203 series adapter?
Q10061601 - Which FreeBSD kernel has included the ARC-1203 series adapter?
Q10071601 - Will ARC-1223-8X RAID controllers support the management by rs232 using Putty?
Q10081601 - When ARC-1882ix-24 background initialization completes, progress of the initialization on the BIOS setup screen is stuck on xx% initializing displayed.
Q10091601 - With ARC-1883LP installed HP Server DL380 gen9, the computer shows an error: Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 0, Function 0, Error status 0x00000000).
Q10101601 - When I try to use the ARC-1882, the HP DL385 G5P computer shows an error: “Fatal PCI Express Error PCI Slot 1 B42/D00/F00 10 “.
Q10011602 - Is there any Red Hat Enterprise Linux 6.7 UEFI booting issue on x86, AMD64, and Intel 64 Systems?
Q10021602 - ST4000NM0033 Seagate enterprise HDD can’t pass self test of ARC-1883ix-16 RAID controller shown randomly time out error, when system powers on.
Q10031602 - Does Areca RAID controller BIOS support auto-selection for Option ROM?
Q10041602 - Is it possible to boot from 4k native on Areca RAID controller?
Q10011603 - For ARC-1883/ARC-1882/ARC-12x3 RAID Controllers, are the Linux drivers for RHEL 6.6 and 7.0 uEFI Aware? And, are the drivers signed with a trusted key for a Linux uEFI boot with Secure Boot enabled?
Q10021603 - CentOS 7.2 benchmark is lower than CentOS 6.5 with Areca default driver.
Q10031603 - The Innodisk 2.5” SATA SSD 3MG2-P is not being detected or detected intermittently while using our MB996SP-6SB with ARC-1883IX-12 Controller.
Q10041603 - ARC-1882ix/4GB with battery is suddenly powered off. It is shown F/W detects: ** SDRAM speed not enough!!** on screen before get into OS.
Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled" again, but the setting is stuck.
Q10011605 - CLI is showing garbage Slot# larger than 32 when the Disk Info command is issued to HGST JBOD 4U60.
Q10021605 - Is there a way to tell RAID controller hardware revision in software?
Q10031605 - The ARC-1883ix appears to scroll though the disks in the Quanta M4600H JBOD until it hits the disk drive in slot 49.
Q10041605 - The ARC-1883ix is hanging on a particular slot when booting the HGST 60 Bay. Removing and reinserting the drive in the particular slot to allow the ARC-8781 boot process to complete.
Q10011607 - The ARC-1883ix expander gets mapping errors using show logs command when connect JBOD.
Q10021607 - Do Areca RAID controllers support SED drive with encrypted function?
Q10011608 - Is it possible to get an update in firmware that support SMTP with address instead of IP and be able to change port nr. SSL would also be awesome to get.
Q10021608 - The event log data in ARC-1203-4i McBIOS RAID manager is abnormal shown as 2003-04.
Q10031608 - The web browser GUI can not accept the password that sets on the McBIOS manager.
Q10041608 - Supermicro X9DRD-7LN4F BIOS v3.2 will stuck at POST, when both ARC-1883i and ARC-1883X firmware updated to 1.53 2016-05-13. If only one alone, system passes POST and boots.
Q10051608 - The HUH721010ALN600 10TB HDD is not power up and visible by ARC-1883ix bios on controller boot.
Q10011609 - Is it completely impossible to read out the “Power On Hours” of a SAS HD with Areca CLI?
Q10021609 - Seagate ST6000VX001 6TB can not detect on ARECA ARC-1264IL-16.
Q10031609 - We need to remove the Guest account access on the RAID card GUI. (Username=Guest, Password=Guest)
Q10011612 - ARC-1200 can't reboot on the MB which is "HD330-Q87" made by DFI.
Q10021612 - We have ARECA1883iX + 91-1883BA-T00B Bat, From CLI I see > Battery Status: 22% after 24hod.charging.
Q10031612 - DFI BT160 ATOM based MB with ARC-1200, system could not be boot up after install OS on it.
Q10011701 - Can we put the ARC-1883ix into Dell PowerEdge R730?
Q10021701 - HP Z800 workstation hangs at boot (after POST, before OS load) if bootable device is not the only volumes connected to 1882i.
Q10031701 - Is there a driver available for windows server 2016?
Q10041701 - One of my hard drives accidentally got disconnected. I plugged the drive back in, but now array shows degraded. How do I reset the RAID set to normal from degraded?
Q10011702 - ARC-1220 cannot update the firmware 1.39 to 1.49 via DOS utility (nflash).
Q10021702- ARC-1883 set to JBOD mode, after removing a disk, it would not beep.
Q10031702 - CLI 1.14.7 shows for ARC-1883CAP-FBM only "22% loaded" instead of «charged (18.4V)».
Q10041702 - Our custumer is running Supermicro X9DRL-iF (BIOS 3.0a) und Areca-1883 (Firmware 1.54 - 2016-11-23), booting hangs at Supermicro BIOS Message B2.
Q10051702 - X9DR3-F (BIOS 3.2a) server will not start with ARC-1883i firmware version = V1.54-20161123, if there are two or more Volume Set. With 1 Volume Set server starts without problem.
Q10011703 - Every time hot swap WD gold drive (WD4002FYYZ) drive on ARC-1203-8i, all other drives will be kicked out.
Q10021703 - ARC-1883ix cannot see any HDD when HGST JBOD 4U60 is set as SES mode.
Q10031703 - Areca RAID Hierarchy shows disk drive numbering different from “Drive Location” label on the HGST JBOD 4U60.
Q10011704 - Does ARC-1883x support a raid over 100TB?
Q10021704 - When ARC-1883LP RAID6 with Blackmagic Ver 2.11 in Write through mode, Read is 0 MB/s. Write is at 224.3 MB/s.
Q10031704 - How can I clear the ARC-1264il-16 internal drive serial numbers as "failed"?
Q10041704 - Supermicro X10SLQ-L will stuck at the BIOS Screen, won’t continue to boot, if there are more than Areca volumes.
Q10051704 - Areca CIM provider can not report failed disks and/or controller failure or battery failure to VMware vSphere client.
Q10061704 - Is it possible to monitor the ARC-1882i via SNMP without Traps?
Q10071704 - Does ARC-1883x controller work with Dell OptiPlex 990?
Q10081704 - Is this controller use the LAN port on the adapter for management, monitoring and alerts, why was created also the CIM Provider for VMWare?
Q10091704 - Customer has base supermicro system with 4 working 24bay jbods from AIC. If he connects a fifth chassis some drives get timeouts.
Q10101704 - Could you please show me how to reset binding IP in the Archttp?
Q10111704 - What’s the RAID card queue length number of ARC-1883i/x-12?
Q10121704 - Does ARC-1883 support vSAN ?
Q10131704 - Trying to setup PCIe RAID controller SMTP alerts to send alerts, and use the Generate Test Event to test it, but I never get an alert.
Q10141704 - What’s difference between Archttp and ArcSAP?
Q10011705 - Do you have an updated version of your Windows API that is compiled against the .net 4.5 libraries, or built using a more recent visual studio?
Q10021705 - When I connect both Primary and Secondary expanders to ARC-1883x, I see each HDD twice.
Q10031705 - ARC-1882P volume set will be created using Intel S3510 SSD but it takes much longer and cause the API time out.
Q10041705 - ARC-1203-2I RAID volume is not detected by Acronis to load image.
Q10051705 - What is the maximum safe temperature for the CPU on the ARC-1883 controller card?
Q10061705 - ARC-1882ix is enabled the "Schedule Volume Check" on a time regular base. But everytime the server did a reboot (update) the volume check begin.
Q10071705 - Do current GA versions of vSphere and VSAN support 4K Native drives?
Q10011706 - Firmware V1.54 2016-05-13 Alarm By Mail function sends incorrect day of week.
Q10021706 - ARC-1880i will not boot if there have more than 1 raid array defined.
Q10031706 - When the Intel SP1200SPS M/B boots up the ARC-1201 card, the RAID adapter BIOS spits out this error "F/W Detected Unknown Error".
Q10041706 - ARC-1264iL have time-out and drop drive issue on FW:V1.54 2016-11-23 and WD6002FRYZ.
Q10051706 - When trying to boot from Intel M/B S1200SPLR and ARECA ARC-1203-8I get F/W DETECTED: ***Unknown error.
Q10061706 - When trying to boot from Intel M/B S1200SPLR and ARECA ARC-1203-8I get F/W DETECTED: ***Unknown error.
Q10011707 - Currently cli.exe shows not a supported 64-bit Windows PE 10.x operating system.
Q10011708 - Is there an update for the non working "Power Up In Standby" (PUIS) command in the Firmware?
Q10011710 - Does the Areca SED function support conform to the Trusted computing Group specifications Opal, Enterprise or both?
Q10021710 - OS is unable to load from an Intel S2600WT 2600WT main board with an ARC-1882IX-12 and an ARC-1203-2I.
Q10031710 - Tried to install mraid-20170811 on MAC OS 10.13 (High Sierra) and the Installer status bar remains stuck.
Q10011712 - Current Arcmsr Linux source fails build on 4.9.54-gentoo mainline.