Areca FAQ System - Q30011406 - ARC-1320 Driver - ArcSAS-V2.0.3 can write and read tape using a 1MB buffer on block size set 4M fixed. But if we go to 2MB on the BRU I/O operations, the card fails to allow access to the tape drive at all.

Q30011406 - ARC-1320 Driver - ArcSAS-V2.0.3 can write and read tape using a 1MB buffer on block size set 4M fixed. But if we go to 2MB on the BRU I/O operations, the card fails to allow access to the tape drive at all.

This issue has fixed by ARC-1320 new version driver ArcSAS 2.0.3 Built Jun 25 2012 or later version.

Tags: ARC-1320, ArcSAS, drive, driver

Last update:: 2015-08-24 09:52
Author:: Simone
Revision:: 1.2

You cannot comment on this entry

Records in this category

Q30011501 - ARC-1320-8X can not work with Infortrend SAS storages - ESDS S12S-G2240 using driver version 6.0.0.10.
Q30011503 - Ubuntu kernel version 3.5.17 gets kernel panic after ARC-1320 HBA driver is loaded with a Quantum Ultrium 6 drive (Model: AQ285A#900) using LTFS.
Q30021503 - Does ARC-1320 Mac driver use MSI?
Q30011504 - ARC-1320ix-16 shows the following massage on the X10DRL-I M/B for about 6 minute “**Warning** : Something Wrong With The Adapter!
Q30011505 - ARC-8040 with ARC-1320-8X is poor AJA performance can after HBA loads BIOS default setting.
Q30011507 - ARC-1320-8i can only recognize one when two LTO tape drives connect on each port.
Q30011508 - Does ARC-1320ix-16 HBA work with UNRAID?
Q30011510 - The ArcSAS installer can not work on new installs of the driver and Mac OS 10.11.