Areca FAQ System - Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.

Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.

After changing the “Read and Discard parity Data” setting to “Enabled”, the benchmark got the following result under Windows Server 2019 with 8x Mach.2 drive:

Q90012408

Tags: ARC-1886-16I, Mach2

Last update:: 2024-09-04 02:03
Author:: Simone
Revision:: 1.3

You cannot comment on this entry

Records in this category

Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.
Q90022408 - After installation of the ARC-1686-4NOD into our HPE ProLiant DL385 Gen10 Plus server and rebooting, the server always boots straight into McBIOS instead of booting the installed OS.
Q90032408 - ARC-1886-16i with 15 SATA SSD in CSE-M28SAB Supermicro bays can detect all Kingston DC600M 7.68TB SATA SSD 15 disks when they are free. “Trim” after creating volume, two drives dropped.
Q90042408 - Intel MAC via Thunderbolt 3 to ARC-1686 or 1886, the revision / firmware # of the device shows as "R001" regardless of what the device is.
Q90052408 - The Hyper-V PCI CentOS 6 hv_pci driver cannot handle ARC-1886 RAID adapter. But ARC-1883 works well.