Questions in 2009 to 2011
FAQ in 2009 to 2011
Page 10 out of 12 Pages
- Q10121106 - Can we use the i-RAM on your SAS RAID adapters?
(5748 views) - Q10111106 - I'm currently testing Mac OS X Lion on my MacPro4,1 w/Areca ARC-1212. There is a severe Problem with the ArcMSR.kext shipping with both Developer Preview 3 and the latest Developer Preview 4 (11A480b): Each RAID Volume on the areca controller is detected under LUN 0 and LUN 1 and mounted twice, which of course causes severe file system corruption.
(6403 views) - Q10101106 - We just bought 11 x AS -1022G-NTF and added all of them a ARC-1212 on the riser card. What’s really strange is that the RAID boards run always during the POST (we can access to the firmware, build a RAID array, etc…) but when we are into OS, the system don’t see the RAID card !
(6504 views) - Q10091106 - ARC-1880i Firmware 1.49 data:2011-02-18 with 4U x 36 bay Chassis Supermicro Chassis SC847E16-R1400UB: 24 bays in the front, backplane with LSI 2x36 SAS Expander and 12 bays in the back, backplane with LSI 2x28 SAS Expander. Plug in the front backplane only, sees all disks in the front and plug in the back backplane only, sees all disks in the back. But if I plug in both the front and the back, only sees the disks from the front backplane, and all disks from the back are missing.
(5646 views) - Q10081106 - When I boot the OpenSUSE 11.4 xen kernel I got the following error:
>arcmsr6: dma_allow_coherent got error.
(5198 views) - Q10071106 - When we have installed Internet Explorer 9 on Windows Server 2008R2, ArcHTTP 1.83 does not start correctly. When we downgrade to IE8 everything works fine.
(5224 views) - Q10061106 - We have a problem during the installation of the drivers for the ARC-1210 on an ESXi 4.1.0 server. Following your instructions included in the read-me file of the driver package we use the Vmware vSphere CLI. The command "perl -vihostupdate …" returns the following error message:
"This operation is NOT supported on 4.1.0 platform."
(4873 views) - Q10051106 - I have a Mac Pro 10.6.7. Model 3,1 (3.2 GHz, dual). Ever since installing the Arc-1880ixl, it will not awaken from sleep. It freezes in the sleep mode and needs to be hard restarted.
(5126 views) - Q10041106 - Pull out a drive that was failing. Replace it with a better drive of the same capacity. Hot spare immediately became part of the raid set. New drive immediately became a hot spare. Volume State is listed as 'Need Rebuild', but nothing appears to be happening.
(8244 views) - Q10031106 - I am having problems daisy chaining these SAS Enclosures to ARC-1880 RAID card. If only one enclosure is hooked up from the external rear SAS it works great, but as soon and I shutdown and connect another enclosure daisy chained to the first, it just times out and reboots over and over while saying waiting for f/w to become ready.
(7212 views)
FAQ in 2009 to 2011