Questions in 2021 to 2024
Page 1 out of 6 Pages
- Q10032410 - In Windows 10, if the ARC-1883 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1883 on NVMe mode.
(18 views) - Q10022410 - One Server back from repair finds this ARC-1883 curio Passthrou#120 Raidset. On other server with same controller, there is nothing like that.
(20 views) - Q10012410 - ARC-1203-4i has times out issue in SYS-611C-TN4R (X13DDW-A M/B) Server.
(17 views) - Q10042408 - When areca cli64 exits from CTRL+D into the loop where CLI> is scrolled over and over again the screen.
(775 views) - Q10032408 - Raid 6 groups has 2 hard drives that failed, and one hard drive has been replaced first.If I replace the second hard drive, will the rebuilding time be counted with the first HDD? Or should we add more time?
(803 views) - Q10022408 - When setting up ARC-1883I the alerts with our SMTP server, it appears that the card is not sending the data to the correct IP (it's sending it to the external/Public IP) rather than the internal relay server that it should send it to.
(838 views) - Q10012408 - ARC-1203-8i will randomly drop WD8005FRYZ (firmware version: 01.01H101) disks at create volume.
(244 views) - Q10052407 - ARC-1203-8i was working normally as a normal Vmware power on. It has a warm boot problem with a controllerARC-1203-8i and a Supermicro X13sei-tf MB.
(296 views) - Q10042407 -After updating the ARC-1686-2NOD card to 1.69, the fan remains very high (around 6300 RPM). Is this normal?
(420 views) - Q10032407 -Will the ARC-1886-8X8I work with 2 SAS Cables attached to a dual expander JBOD?
(396 views)