Areca FAQ System - Q10042408 - When areca cli64 exits from CTRL+D into the loop where CLI> is scrolled over and over again the screen.

Q10042408 - When areca cli64 exits from CTRL+D into the loop where CLI> is scrolled over and over again the screen.

API code does not support Ctrl D (EOF) command, please use EXIT command to leave cli. And non-interactive mode is not logout command needed.

Tags: API, CLI

Last update:: 2024-08-15 06:25
Author:: Simone
Revision:: 1.0

You cannot comment on this entry

Records in this category

Q10012101 - How to enable SSL certificate of ArcHTTP in Web Browsers?
Q10012102 - Does the ARC-1883IX-12 support auto volume decryption function when the server startup?
Q10022102 - ARC-1883 does not show up while the server is booting, nor is it visible in the Supermicro X11SRL-F-O motherboard's BIOS.
Q10032102 - Is the "Delete ISE RAID Set" equal to "Delete SED RAID Set" + Secure Erase Data?
Q10052102 - The server doesn't load the areca BIOS in Legacy mode. Quiet boot = off, Oprom for all PCI slots are set to legacy, boot type is legacy.
Q10042102 - Is there a method to get the debug message from web browser console?
Q10062102 - How to create a bootable USB drive to access the default EFI shell to launch the McBIOS RAID manager?
Q10072102 - ASRock J5040-ITX is UEFI-Only (no CSM). How can RAID adapter configure the RAID 1 without "Press F6" option during boot with the J5040-ITX.
Q10082102 - The ARC-1203 CPU temperature of the RAID controller is high (70°C). I would like to add a fan on the chipset. It is possible?
Q10012103 - After ARC-1203-2I reboot tests with windows version 6.20.0.32, it occurred failed at the 10th restart.
Q10022103 - Can the RAID controller supports the SNMP messages from the Management LAN of the ESXi?
Q10032103 - The fan on my ARC-1220 controller is starting to make noise. I expect it will fail soon. Where can I get a replacement?
Q10042103 - I have an Intel SR1625UR server system with a passive SAS/SATA backplane + midplane. With an ARC-1222 in the system, this works as expected . I'm trying to get SSDs (Intel 530, Samsung 850 Evo ...) working in this system with my RAID controller, but I am not succeeding with my ARC-1882i.
Q10052103 - SATA Power Up In Standby does not seem to work with ARC-1883ix-24 and latest firmware.
Q10062103 - Does the 1884 models still support RAID-Controller based "Full Volume Encryption" like the 1882 series did or does it just support SED-Encryption ?
Q10072103 - Samsung 980 Pro causes ARC-1886-6N2I RAID adapter "timeout" (300 s) at boot.
Q10082103 - When iMac with MacOS 11.2.3 is in sleep mode, the ARC-8050T3 Raid storage is powering on every hour at the events log.
Q10012106 - Is there a way to run ArcHTTP so that it survives a reboot or a logout in Red Hat?
Q10022106 - There has not seen any drives status direct in ESXi-7.0U1c-17325551 under Hardware - Storage - . The controller is seen as status unknown. Cim provider (1.0.4-21.04.27.180600) is installed.
Q10012108 - Areca old firmware the Hardware Monitor page shows the temperatures of all installed drives. Newer raid cards and firmwares don’t show the HDD temperatures until you click on a slot.
Q10012111 - M.2 NVMe MICRON 7300PRO x1 on ARC-1886-6N2I creates RAID0 and found that M.2 MICRON 7300Pro is fail.
Q10022111 - Does ARC-1203-2i work to boot mirrored SSD in VMware versions 7.0u3 or 6.7u3?
Q10012201 - The RAID 6 array using advanced format 512e drive is currently in degraded status with one failed drive. I've added the 4Kn drives as hot spares but the array wouldn't rebuild. Should I just get 512byte sector drives?
Q10022201 - The WS X299 SAGE motherboard will NOT detect the ARC-1886 card in any PCIe slot.
Q10012204 - The Linux cli64 command sometimes can not connect with the controller. When we issue the command there is a long pause and then the copyright message and an error of "GuiErrMsg: Timeout."
Q10012207 - There is no shortcut on the desktop or in the Programs menu to access the ARECA RAID manager. When I try to launch “ArcHttpSrvGUI.exe”, I see the message “Application has one instance running in the system”.
Q10022207 - SMC: CSE-826BAC4-R920LPB is installed an ARC-1886-16i with 2x Samsung PM9A3 NVMEs attached which getting lost in WebGUI after a Server-restart.
Q10032207 - Supermicro AS-2014CS-TR is installed an ARC-1886-16i (Firmware 1.62) with Intel P4510 NVMes. The drives not getting detected.
Q10012208 - Raid card records the serial number of the HDD that had failed, but how many serial numbers does it record?
Q10022208 - When I shutdown the MacPro7,1 installed ARC-1886-4N8I with 4x MTF-7300PRO-1920M2 NVMe SSD, it will reboot by itself with following message: "Power Off timed out in phase 'Notifying power plane drivers'. Total 30000 ms: vfs_unmountall: 846 ms".
Q10032208 - Is there any specs on how loud the ARC-1883ix-12 fan noise? How many decibels?
Q10042208 - Is there any specs on how loud the ARC-1886-4X12I fan noise? How many decibels?
Q10052208 - The Gigabyte Z390 DESIGNWARE M/B can not launch the ARC-1886 McBIOS RAID configuration utility message during the start-up sequence (after the system BIOS startup screen but before the operating system boots).
Q10062208 - ARC-1203-2I is not getting RAID configuration utility on screen. Instead of getting Shell screen message on screen.
Q10012212 - How to launch the ARC-1203 McBIOS RAID configuration utility message during the start-up sequence in the Advantech AIMB-707G2 M/B?
Q10022212 - Areca 1886 connects to Supermicro 2029U-TN24R4T with BPN-NVMe3-216A-N4 backplanes only detected one drive per switch.
Q10032212 - Is there any solution to do the areca raid configuration (McBIOS setup) on a UEFI only mainboard before the OS?
Q10022301 - I flashed the firmware to version 1.66 package then rebooted the machine, now it will only load the Areca setup utility and will not allow to boot into existed Windows. It continues to reboot into the same utility. Press F10 to reboot and it just goes back to the utility.
Q10032301 - ARC-1886-16I with Supermicro BPN-SAS3-LB16A-N10 can only get Micron_7450_MTFD_15363.0GB NVMe drives to work 16Gx1 speed not 16Gx4.
Q10012305 - How to disable a virtual bootable disk (UEFI OS) for RAID controller ARCxxxxUEFI.BIN code to launch the McBIOS setup utility?
Q10022305 - Firmware version 1.67 deletes old version firmware NTP /SNMP/ Alert By Mail configuration all entered numbers and the user needs to fill in everything again.
Q10012301 - Supermicro SYS-110P-WTR doesn’t detect the intel-3600 NVMe when using ARC-1886-16I (Firmware 1.63).
Q10012407 -The system fails to reboot with ARC-1886 RAID controller card and Supermicro X13DEI, regardless with configured disks or without. RAID function is OK from system cold start.
Q10022407 -Supermicro X13-DAI-T is experiencing an issue when Areca 1886-16i is connected. The motherboard is getting stuck on error code 92 DXE--BIOS PCI Bus Enumeration.
Q10032407 -Will the ARC-1886-8X8I work with 2 SAS Cables attached to a dual expander JBOD?
Q10042407 -After updating the ARC-1686-2NOD card to 1.69, the fan remains very high (around 6300 RPM). Is this normal?
Q10052407 - ARC-1203-8i was working normally as a normal Vmware power on. It has a warm boot problem with a controllerARC-1203-8i and a Supermicro X13sei-tf MB.
Q10012408 - ARC-1203-8i will randomly drop WD8005FRYZ (firmware version: 01.01H101) disks at create volume.
Q10022408 - When setting up ARC-1883I the alerts with our SMTP server, it appears that the card is not sending the data to the correct IP (it's sending it to the external/Public IP) rather than the internal relay server that it should send it to.
Q10032408 - Raid 6 groups has 2 hard drives that failed, and one hard drive has been replaced first.If I replace the second hard drive, will the rebuilding time be counted with the first HDD? Or should we add more time?
Q10042408 - When areca cli64 exits from CTRL+D into the loop where CLI> is scrolled over and over again the screen.
Q10012410 - ARC-1203-4i has times out issue in SYS-611C-TN4R (X13DDW-A M/B) Server.
Q10022410 - One Server back from repair finds this ARC-1883 curio Passthrou#120 Raidset. On other server with same controller, there is nothing like that.
Q10032410 - In Windows 10, if the ARC-1883 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1883 on NVMe mode.