Questions in 2021 to 2024
Page 1 out of 6 Pages
- Q10042408 - When areca cli64 exits from CTRL+D into the loop where CLI> is scrolled over and over again the screen.
(766 views) - Q10032408 - Raid 6 groups has 2 hard drives that failed, and one hard drive has been replaced first.If I replace the second hard drive, will the rebuilding time be counted with the first HDD? Or should we add more time?
(792 views) - Q10022408 - When setting up ARC-1883I the alerts with our SMTP server, it appears that the card is not sending the data to the correct IP (it's sending it to the external/Public IP) rather than the internal relay server that it should send it to.
(832 views) - Q10012408 - ARC-1203-8i will randomly drop WD8005FRYZ (firmware version: 01.01H101) disks at create volume.
(237 views) - Q10052407 - ARC-1203-8i was working normally as a normal Vmware power on. It has a warm boot problem with a controllerARC-1203-8i and a Supermicro X13sei-tf MB.
(291 views) - Q10042407 -After updating the ARC-1686-2NOD card to 1.69, the fan remains very high (around 6300 RPM). Is this normal?
(409 views) - Q10032407 -Will the ARC-1886-8X8I work with 2 SAS Cables attached to a dual expander JBOD?
(387 views) - Q10022407 -Supermicro X13-DAI-T is experiencing an issue when Areca 1886-16i is connected. The motherboard is getting stuck on error code 92 DXE--BIOS PCI Bus Enumeration.
(376 views) - Q10012407 -The system fails to reboot with ARC-1886 RAID controller card and Supermicro X13DEI, regardless with configured disks or without. RAID function is OK from system cold start.
(417 views) - Q10012301 - Supermicro SYS-110P-WTR doesn’t detect the intel-3600 NVMe when using ARC-1886-16I (Firmware 1.63).
(347 views)