Areca FAQ System - Q90012412- What would be the benefit of Areca RAID adapter host interface switching from "Areca Legacy Mode" (currently on) or "NVME Mode"?

Q90012412- What would be the benefit of Areca RAID adapter host interface switching from "Areca Legacy Mode" (currently on) or "NVME Mode"?

NVMe mode means raid adapter will emulate as a NVMe device, what drive type you use is irrelevant. And the advantage of NVMe mode is builtin driver support as NVMe device is default supported by all currently available operating systems.

Tags: Legacy Mode, NVMe, NVMe mode

Last update:: 2024-12-23 10:29
Author:: Simone
Revision:: 1.0

You cannot comment on this entry

Records in this category

Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.
Q90022408 - After installation of the ARC-1686-4NOD into our HPE ProLiant DL385 Gen10 Plus server and rebooting, the server always boots straight into McBIOS instead of booting the installed OS.
Q90032408 - ARC-1886-16i with 15 SATA SSD in CSE-M28SAB Supermicro bays can detect all Kingston DC600M 7.68TB SATA SSD 15 disks when they are free. “Trim” after creating volume, two drives dropped.
Q90042408 - Intel MAC via Thunderbolt 3 to ARC-1686 or 1886, the revision / firmware # of the device shows as "R001" regardless of what the device is.
Q90052408 - The Hyper-V PCI CentOS 6 hv_pci driver cannot handle ARC-1886 RAID adapter. But ARC-1883 works well.
Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.
Q90022410 - Supermicro X11DPH-T will hang at boot POST on ARC-1886-4X12I with firmware 1.70, even without any disk attached. Tried: auto, legacy, uefi no difference, all hangs at counting the seconds, either hang at “0” or “5” seconds.
Q90012411 - What firmware and software suite start to support native NVMe mode on Areca RAID adapter?
Q90022411 - How to enable NVMe mode to use NVM in-box driver?
Q90032411 - Can ARC-1886-16i card work with Broadcom cable and Areca cable, a x8 SFF-8654 to x8 U.3 SFF-8639 connection using Micron 7540 U.3?
Q90042411 - After every 3.5-4.5 hours, the storage on the ARC-1203-2N RAID controller becomes unavailable (failed) for the Proxmox operating system. Only “Time Out Error” information was found on the ARC-1203-2N.
Q90052411 - Under Areca NVMe emulation mode, it needs to revise Timeout and DPC Watchdog Time after Windows installed.
Q90012412- What would be the benefit of Areca RAID adapter host interface switching from "Areca Legacy Mode" (currently on) or "NVME Mode"?