Areca FAQ System - Q50031508 - Will any one of the two ARC-8018 SAS Expander modules be able to report status on both?

Q50031508 - Will any one of the two ARC-8018 SAS Expander modules be able to report status on both?

Both expanders keep/report the same status.

Tags: 12Gb/s SAS expander, ARC-8018, Q50031508

Last update:: 2015-08-24 06:26
Author:: Simone
Revision:: 1.1

You cannot comment on this entry

Records in this category

Q50011403 - What’s meaning DHPM on ARC-8028 CLI command?
Q50021403 - Should I do something on 12G Expander when I am going to increase performance?
Q50031403 - Is there any connector on the ARC-8028 to detect the power supply status?
Q50041403 - Does SATA 1.5G support by ARC-8028/8018 12Gb/s SAS expander module?
Q50011404 - How to daisy chain two ARC-8028 with ARC-1883X?
Q50011410 - ARC-8028 only runs at 6Gb/s speed on those 12 phys associated with the external SFF-8644 connectors.
Q50011411 - ARC-8028-12G expander with ATTO R680 - 6G RAID card, the performance drops to 100MB/s - 230MB/sec with 16 SATA HDD.
Q50011311 - ARC-4036ML Fan keeps on/off repeatedly when it firstly powers on 5 minutes and then it switches on host system later.
Q50011203 - To make use of the LSI SAS switch 6160’s zoning features, it need to have the passwords on the 6160 and the ARC-8026 match. What is the ARC-8026 zoning password?
Q50011508 - Does ARC-8018 expander allow to turn each 12Gb/s SAS disk on and off? via CLI
Q50021508 - Is there a way to set it not to light up Red LED for empty slot on ARC-8018 expander?
Q50031508 - Will any one of the two ARC-8018 SAS Expander modules be able to report status on both?
Q50041508 - Can ARC-8018 expander remotely turn on and off the JBOD power?
Q50011106 - Can we mix 6G ARC-8026 and 3G ARC-8020 on one daisy chain?
Q50011111- Does ARC-8026 port expander compatible with LSI 3Gb/s 9690-4i-4e RAID controller?
Q50011005 - We don't know what is going on with 4-bay PSUs but today another customer complain 4-bay PSU (arc4020) died.
Q50011012 - I've got a customer who is trying to daisy chain a 8026 behind an 8020 which is attached to a ARC-1680ix. We updated to the latest firmware but it still gets stuck on BIOS. ARC-8026 without the ARC-8020 does the same.
Q50011512 - ARC-8028-32 can not enable databolt, dhpm or edfb for PHY 40 to 47.