Areca FAQ System - Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.

Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.

A-This behavisor only happens on Win10. ARC-1886 needs to have device on Lun0 for Win10 Stornvme driver to open interface for Archttp. There is no this kind of limitation on Win11, Linux and FreeBSD.

Tags: 1886, archttp, NVMe, Windows 10

Last update:: 2024-12-13 09:59
Author:: Simone
Revision:: 1.1

You cannot comment on this entry

Records in this category

Q90012408 - ARC-1886-16i in a PCIe G4 slot with 8x Seagate ST14000NM0081 Mach2 SAS HDD attached in a RAID5 configuration uses the AJA benchmark tool for measurements. The file size to 64GB only gets write speed at 3.6GB/s and read at very low 1GB/s.
Q90022408 - After installation of the ARC-1686-4NOD into our HPE ProLiant DL385 Gen10 Plus server and rebooting, the server always boots straight into McBIOS instead of booting the installed OS.
Q90032408 - ARC-1886-16i with 15 SATA SSD in CSE-M28SAB Supermicro bays can detect all Kingston DC600M 7.68TB SATA SSD 15 disks when they are free. “Trim” after creating volume, two drives dropped.
Q90042408 - Intel MAC via Thunderbolt 3 to ARC-1686 or 1886, the revision / firmware # of the device shows as "R001" regardless of what the device is.
Q90052408 - The Hyper-V PCI CentOS 6 hv_pci driver cannot handle ARC-1886 RAID adapter. But ARC-1883 works well.
Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.
Q90022410 - Supermicro X11DPH-T will hang at boot POST on ARC-1886-4X12I with firmware 1.70, even without any disk attached. Tried: auto, legacy, uefi no difference, all hangs at counting the seconds, either hang at “0” or “5” seconds.
Q90012411 - What firmware and software suite start to support native NVMe mode on Areca RAID adapter?
Q90022411 - How to enable NVMe mode to use NVM in-box driver?
Q90032411 - Can ARC-1886-16i card work with Broadcom cable and Areca cable, a x8 SFF-8654 to x8 U.3 SFF-8639 connection using Micron 7540 U.3?
Q90042411 - After every 3.5-4.5 hours, the storage on the ARC-1203-2N RAID controller becomes unavailable (failed) for the Proxmox operating system. Only “Time Out Error” information was found on the ARC-1203-2N.
Q90052411 - Under Areca NVMe emulation mode, it needs to revise Timeout and DPC Watchdog Time after Windows installed.
Q90012412- What would be the benefit of Areca RAID adapter host interface switching from "Areca Legacy Mode" (currently on) or "NVME Mode"?
Q90012502- The Volume Consistency check is being executed, if the unit is being rebooted, the volume check does not automatically pick up where it stopped.
Q90022502- After the firmware upgrade the Web UI supports HTTPS. How can I disable HTTP running on Port 80?
Q90032502- When ARC-1203-2N with NVMe mode power-on/cold boot, Supermicro X13SEI-TF Bios will not detect the RAID volume.
Q90042502- What is the really data volume set initialization time using ARC-1886?
Q90052502- Is there a way to do factory reset to original raid adapter the settings?
Q90062502- Is Areca RAID adapter work macOS native NVMe driver?
Q90012503 - Can Areca provide the detailed information about what “Rescue1” and “Rescue2” do, as well as “No Init”.
Q90022503 - Raid set had disjointed itself... two drives on one with two missing, two drives on the other with two missing. Tried the RESCUE / SIGNAT and that didn't do anything.
Q90012506- A system using ARC-1886 and Seagate X24 20TB SAS drives notices an issue when connection more than 40 drives to a single controller the firmware initialisation process on boot hangs flashing the 41'st drive.
Q90022506- REHL / Alma 9.5 Linux driver haven't updated drivers for ARC-1886 card. Is driver support for Linux ended?