After windows is installed, add registry to
<a> Set iotimeout for NVME to 90 seconds (original value is 10 seconds)
<b> Set DpcWatchdogPeriod to 120 seconds (original value is 20 seconds)
<c> use NVMEModeKey.reg
NVMEModeKey.reg can download from below link:
https://www.areca.us/support/s_windows/nvme/NVMEModeKey.reg
Q90052411 - Under Areca NVMe emulation mode, it needs to revise Timeout and DPC Watchdog Time after Windows installed.
- Last update:
- 2024-11-20 09:58
- Author:
- Simone
- Revision:
- 1.0
You cannot comment on this entry
