Questions in 2021 to 2024
Page 1 out of 6 Pages
- Q10032411 - Under Areca NVMe emulation mode, it needs to revise Timeout and DPC Watchdog Time after Windows installed.
(172 views) - Q10022411 - How to enable NVMe mode to use NVM in-box driver?
(43 views) - Q10012411 - What firmware and software suite start to support native NVMe mode on Areca RAID adapter?
(104 views) - Q10032410 - In Windows 10, if the ARC-1883 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1883 on NVMe mode.
(260 views) - Q10022410 - One Server back from repair finds this ARC-1883 curio Passthrou#120 Raidset. On other server with same controller, there is nothing like that.
(261 views) - Q10012410 - ARC-1203-4i has times out issue in SYS-611C-TN4R (X13DDW-A M/B) Server.
(166 views) - Q10032408 - Raid 6 groups has 2 hard drives that failed, and one hard drive has been replaced first.If I replace the second hard drive, will the rebuilding time be counted with the first HDD? Or should we add more time?
(1093 views) - Q10022408 - When setting up ARC-1883I the alerts with our SMTP server, it appears that the card is not sending the data to the correct IP (it's sending it to the external/Public IP) rather than the internal relay server that it should send it to.
(1157 views) - Q10012408 - ARC-1203-8i will randomly drop WD8005FRYZ (firmware version: 01.01H101) disks at create volume.
(484 views) - Q10052407 - ARC-1203-8i was working normally as a normal Vmware power on. It has a warm boot problem with a controllerARC-1203-8i and a Supermicro X13sei-tf MB.
(433 views)