Commands to dump the active optical cable serial eprom data

cable [c0|c1|c2|..]

 CLI>lsd con

 Show SES elements information

 Connector Element (0x19):

 ========================================

 NAME         PHY  NLR   TYPE  ROUTE CONNECTED-ADDRESS

 Connector00  20         05

 Connector00  21         05

 Connector00  22         05

 Connector00  23         05

 Connector01  16   12G   05    S     500605B0-0388B8B0

 Connector01  17   12G   05    S     500605B0-0388B8B0

 Connector01  18   12G   05    S     500605B0-0388B8B0

 Connector01  19   12G   05    S     500605B0-0388B8B0

 CLI>cable c1                 ;; c1 is the Connector01

If the command can read the serial eeprom data then it is an active cable, otherwise passive.