PCIe RAID controller BIOS and web browser login will send the clock settings to the controller. For Mac user, please use the archttp utility to synchronize the system time. From archttp utility 2.4.3 version, it has included the function to synchronize the system time.
Tags: Archttp, BIOS, Mac, PCIe, utilityQ10071410 - I'd like to know how to set and keep the clock settings for the PCI e RAID controller without using NIC. Everytime I look at the event log, the times are off, thus making the logs useless.
- Last update:
- 2016-02-16 05:02
- Author:
- Simone
- Revision:
- 1.0
You cannot comment on this entry
Records in this category
- Q10081501 - How do we identify slow hard disk on Areca RAID Controller?
- Q80011501 - Is ARC-5026 able to give the SMTP server a FQDN, instead of an IP?
- Q80021501 - How do I install my 2.5” SSD into Areca Thunderbolt RAID storage?
- Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?
- Q80031501 - When we install Windows Server 2012 R2 on an Areca controller, we have the option to remove the controller’s volume in the OS.
- Q10071503 - Have Areca RAID cards supported the encryption function?
- Q10081503 - When user inserts multiple RAID adapters in a server, Archttp display same name “ARC-xxxx Web Management” for different devices. User confuses to choose any storage through Archttp to administrate those different storages.
- Q80011503 - ARC-5026 unit is spontaneously powering off -- and immediately powering on.
- Q10041504 - Do any of the current Areca RAID cards support trim for SSDs?
- Q80011504 - Areca ARC-5028T2 can not detect on HP Z820 Thunderbolt port.
- Q80021504 - I would like to be able to turn OFF ARC-8050T2 Intelligent Power.
- Q80011505 - Mac OS version 10.10.2 can find pci device (ARC-8050T2) but can't load areca raid driver in New MAC Pro system.
- Q80011401 - I am booting Mountain Lion 10.8.5 from a RAID 0 volume on Areca RAID adapter. I upgrade to Mavericks (10.9) and run the installer and the system reboots, the installation hangs at the startup screen and I have to manually reselect Mountain Lion as my startup volume.
- Q80011402 - When I connect 8050 to ASUS Z87 deluxe/quad, 8050 will start up but then no response after scan all hard drive and nothing on the LCD front panel.
- Q10121403 - Flashing disk drives attached to an Areca RAID controller.
- Q10131403 - Locate and identify drives in an enclosure or backplane with Fault/Activity LEDs.
- Q10181403 - How to rebuild a degraded RAID set on a SATA or SAS RAID controller?
- Q10191403 - Are 4TB drives supported on Areca RAID controllers?
- Q80011403 - ARC-8050T2 can not work on MacBook Air with OSX 10.7.5, but New Mac Pro is ok.
- Q80021403 - I just bought an ARC-8050T2. How to set encrypt data using the full volume encryption.
- Q80031403 - ARC-8050 manual says that the files of the firmware-update are labeled as ARC-8050NNNN.BIN, but the download files of the firmware package are labeled ARC-1882NNNN.BIN. Are these nevertheless the correct files?
- Q80041403 - I used a Mac mini (late 2012, so with "just" thunderbolt 1 technology) with Mac OSX 10.8.5. I just installed only the driver. Everything was fine, but when the Mac goes to sleep (or I call it hibernate) the areca tower is restarting/rebooting every 1 minute until I wake the Mac up.
- Q80051403 - Installing Windows Server 2012R2 on a Mac Mini with bootcamp drivers 5.1.56.21 connecting to an ARC-8050. Randomly, the RAID-6 array is apparently removed while the system is still running (Event ID 29 from source arcs_a64 : "Areca RAID Volume removal")
- Q80061403 - I can not access a new encrypted volume on ARC-8050T2.
- Q80071403 - Is there any performance drop with encrypted volume on ARC-8050T2?
- Q80011506 - The Mac OS X system just needed to be rebooted after installing mraid. Maybe a restart should be added to the installer.
- Q80021506 - Does ARC-8050T2 power up/down via the optical cable?
- Q80031506 - ARC-4607T2 gets poor AJA write performance under Xsan environment.
- Q80011307 - Is it possible for the 8050 to initialize without having the Mac turned on?
- Q80011308 - After ARC-8050 firmware updated, ejecting Thunderbolt cable does not turn off power.
- Q80021308 - I can not use the ARC-8050 installer, all the lights are green, but alas the software/driver installation is hanging up.
- Q80031308 - ARC-8050 can read 850MB/s under AJA test, but only 650MB/s using Blackmagic Disk Speed test.
- Q80041308 - I have an 8050 that can not be detected by P8Z77-V PREMIUM on cold or restart. The 8050 works fine if I plug it in after windows starts up.
- Q80011310 - I have 4x4TB drives on ARC-8050 and setup the Array via the config webpage as RAID5 giving me 10TB overall space. I am running OSX 10.8.5 and only showing the RAID as a 2TB drive.
- Q10081310 - Customer upgraded Mac OS X from 10.8 to 10.9 successfully. However, Archttp wouldn't run from the desktop.
- Q10031311 - Under MAC PRO machine, update to firmware 1.52 all files , and then reboot,it can not boot from the original bootable volume on the RAID controller.
- Q80011311 - I couldn't get Mac OS X Mavericks boot from the raid volume on both 8050 and 5026, both thunderbolt failed. However, with the same raid volume, it boots no problem with USB 3.0 connection on 5026.
- Q80021311 - After updating ARC-8050 boot, firm, and mbr0 bin files to 1.52 version using ethernet port, the unit can't boot up during the reboot, all three LED flashing with LCD panel shown "-" only.
- Q80031311 - Is ARC-8050 volume bootable via Thunderbolt?
- Q80011312 - ARC-5026 works fine with thunderbolt, but when connected via USB 3.0, none of the partitions I've made shows.
- Q80021312 - I see the limited number USB 3.0 volumes on ARC-5026. If using the Thunderbolt side only you can have 128 volumes. Any one of the Thunderbolt volumes can be marked as SCSI CH:0/LUN:0/ID:0 and only that volume can be shared with USB 3.0 side.
- Q80031312 - I Have been getting error messages when I connect my Mac Pro to my ARC-8050. The LED reads Fan #! Failure. The fan appears to be running when I looked at the back.
- Q80041312 - When I force power the 5026 without any cable connected other than the power supply or USB 3.0 host connects only: it goes to and stays on the "start the kernel" message.
- Q80051312 - Can we use the Archttp to manage only USB3.0 port in 5026 model?
- Q80061312 - ARC-5026 is too noisy for a desktop raid. Is it possible to reduce the fan noise?
- Q10011507 - After install of the mraid driver and cli and archttp utilities, do I need to have Java installed anymore?
- Q10041508 - Does Areca RAID adapter support the new WD 5TB/6TB HDD firmware update function code about 5MB in size?
- Q10011509 - Does Areca RAID adapter support write back cache with battery backed RAM on JBOD disks or passthrough disk?
- Q80011509 - Windows 10 cannot detect the volume on ARC-8050T2.
- Q10011510 - Is it possible to enable the Areca RAID controllers encryption function on the boot volume?
- Q10021510 - Is the encrypted volume option available with the 16 volumes?
- Q10031510 - The MRAID installer can not work on new installs of the MRAID and Mac OS 10.11.
- Q10061510 - Samsung SSD 850 PRO 1TB Firmware Version = EXM02B6Q drives are showing "Time Out Error".
- Q10011512 - One SSD Disk fails in the ARC-1883i Raid Set a while in usage. After changing the Disk, it fails after a few hours again.
- Q10021512 - How to fix the ArcHTTP infinite loop login with Microsoft Edge Browser?
- Q80011404 - Can I install Windows 7 on ARC-8050T2, and boot from ARC-8050T2?
- Q80021404 - Does Linux support for ARC-5026/ARC-8050T2?
- Q80031404 - Opening the 'ArcHTTP64', however I am unable to find the 'ARC-5026 Web Management' tab or button.
- Q10141404 - Is there a MRAID installer that doesn’t require Java for Mac OS X?
- Q80041404 - Is there any information about the level of DB (decibel) of ARC-5026?
- Q80011405 - HP Z420 computer can not detect ARC-5026 USB 3.0 during boot up. ARC-5026 switches on and off shortly while the Z420 boots up.
- Q80021405 - Is the Areca ARC-8050 compatible with 220v 50 Hz?
- Q80031405 - Does the ARC-5026 support a battery backup from the RAM cache?
- Q80041405 - Does ARC-8050T2 support Optical thunderbolt cable?
- Q10061406 - I have set "Alert By Mail Configuration" and configured: Send Only Urgent Event. However, I am receiving emails with subject "RaidAlert-WARNING".
- Q80011406 - Is there any information about the level of DB (decibel) of ARC-8050T2?
- Q10011407 - Is there a problem with a 4KN drive or can I only use hard drives with 512E support sectors?
- Q60011407 - On Areca Desktop Box, will the Seagate STBD6000100 6TB drive fit your drive sled without modification?
- Q80011407 - Can’t get the 8050T2 to connect to the Z97 motherboard, all the lights come on the 8050T2 but nothing on the front display.
- Q80021407 - Seagate 12Gb/s SAS ST6000NM0014 Drives will not be detected on ARC-8050T2 Storage.
- Q80031407 - Since updating my 2013 Mac Pro OS to 10.9.4, I get a kernel panic on startup when my 8050 enclosure is attached via Thunderbolt.
- Q10011408 - How to solve the problem with reads stalling that causes by out of order command completion.
- Q10031410 - Two Bad drives: Hus724040ale640 connected to Areca 1882X, can’t power on server and time out after 300secs.
- Q10041410 - ARC-1882ix-12 can not recognize in Windows 2008R2 device manager when put into Asus m/b P8P67 WS revolution. Other m/b works fine.
- Q80011410 - I have the ARC-5026 plugged into the USB port of a CalDigit FASTA-6GU3 Pro. The ARC-5026 powers off but does not power on again when I power on the computer from sleep mode.
- Q10061410 - Does Areca firmware have day/time to program the Volume Check Scheduler?
- Q10071410 - I'd like to know how to set and keep the clock settings for the PCI e RAID controller without using NIC. Everytime I look at the event log, the times are off, thus making the logs useless.
- Q80021410 - When your driver for the Areca 8050 Thunderbolt RAID will be available for OS X Yosemite?
- Q10021411 - Mac OS X Disk utility sees the new creation volume but doesn't allow any operation (erase or partition).
- Q80011411 - Areca 5026 with 4 Samsung 840 SSDs issue happens directly after creating a Raidset. Slot 3 is getting Failed Status immediately but the SSD is healthy and OK.
- Q80011412 - I upgraded the ARC-5026 firmware to V1.52 2014-10-01 to resolve an issue with the fans being too loud. Fans are quiet now, but now I cannot mount drives via USB.
- Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed function.
Tags
1203 12Gb/s SAS expander 1883 1886 4KN drive Acronis Advanced Data Mirroring AJA Alert By Mail Configuration ALUA AOC API ARC-1035 ARC-1130 ARC-1200 ARC-1201 ARC-1202 ARC-1203 ARC-1203-2I ARC-1203-2N ARC-1203-8i ARC-1210 ARC-1212 ARC-1213 ARC-1213-4i ARC-1214 ARC-1214-4I Arc-1214-8I ARC-1220 ARC-1221 ARC-1221x ARC-1222 ARC-1223 ARC-1223-8i ARC-1223-8X ARC-1224 ARC-1224-8I ARC-1225-8I ARC-1226 ARC-1230-8x ARC-1231 ARC-1231Ml ARC-1260 ARC-1261ML ARC-1264il-12 ARC-1264il-16 ARC-1280 ARC-1280ML ARC-12x3 ARC-12x4