Areca FAQ System - Q50011808 - Expander reported as Enclosure status "Unhealthy" under Windows Failover Cluster.

Q50011808 - Expander reported as Enclosure status "Unhealthy" under Windows Failover Cluster.

Windows server tools sometimes will get abnormal status at initial stage. Please download expander firmware revision: 03.01.37.69 07/18/18 to fix the “Unhealthy” issue.

Tags: firmware

Last update:: 2021-02-04 10:41
Author:: Simone
Revision:: 1.1

You cannot comment on this entry

Records in this category

Q50011601 - Does this ARC-8028 support AOC?
Q50011603 - Does ARC-8018 12Gb/s SAS expander module support tape drives?
Q10031605 - The ARC-1883ix appears to scroll though the disks in the Quanta M4600H JBOD until it hits the disk drive in slot 49.
Q10041605 - The ARC-1883ix is hanging on a particular slot when booting the HGST 60 Bay. Removing and reinserting the drive in the particular slot to allow the ARC-8781 boot process to complete
Q50011605 - LSI MSM locate command doesn't work on 8028 expanders.
Q50011609 - Areca 12G expanders do not respond to locate lights from LSI 6G or 12G (or Intel) RAID card, once the drive is part of a RAID.
Q50011701 - Can we connect Active Optical Cable between LSI SAS9300-8e and ARC-8018 expander.
Q50021701 - Does ARC-1883ix expander output support expander Direct Routing input connection?
Q50011704 - Can I connect an ARC-4038ML to an ARC-4038? This 4038 is to be connected to an ARC-1883x.
Q50011705 - Does ARC-4038 support an external SAS tape drive to the SFF-8088 expansion port?
Q50011707 - Does this ARC-8028 support AOC?
Q50021707 - Can we connect Active Optical Cable between LSI SAS9300-8e and ARC-8018 expander?
Q50011712 - Center LED (Power LED/Global Fault LED) of ARC-4020ML is blinking and alert beep ringing.
Q50011808 - Expander reported as Enclosure status "Unhealthy" under Windows Failover Cluster.
Q50021808 - Can we update firmware on 8028-24 via SAS cable connection with ‘sg3_util’ tool?
Q50011907 - Can the 4036ML be daisy chained from a 4036, which is connected to an 1882x HBA?
Q50021907 - How to identify the cable is active or not?
Q50031907 - How to dump the active cable data using Areca JBOD command?
Q50011907 - Can the 4036ML be daisy chained from a 4036, which is connected to an 1882x HBA?
Q50012009 - ARC-72xx JBOD has the 12V over voltage event.