Areca FAQ System - Q60011001 - Is there any initiator for Mac OS X which can work with ARC-5040 iSCSI host?

Q60011001 - Is there any initiator for Mac OS X which can work with ARC-5040 iSCSI host?

The following link is globalSAN iSCSI initiator for OS X which is available as a free download to all Mac users.

http://www.studionetworksolutions.com/products/product_detail.php?t=more&pi=11

Tags: ARC-5040, iSCSI, Mac

Last update:: 2021-02-04 10:49
Author:: Simone
Revision:: 1.2

You cannot comment on this entry

Records in this category

Q10081501 - How do we identify slow hard disk on Areca RAID Controller?
Q60011501 - How do I install my 2.5” SSD into ARC-8040?
Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?
Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?
Q40011501 - How can we update the on-board expander firmware on the external RAID controllers?
Q60011503 - How to connect ARC-5020 through iSCSI to windows 7 Enterprise?
Q40011505 - Does Areca CLI support external RAID controller using lan port?
Q10121403 - Flashing disk drives attached to an Areca RAID controller.
Q10131403 - Locate and identify drives in an enclosure or backplane with Fault/Activity LEDs.
Q10181403 - How to rebuild a degraded RAID set on a SATA or SAS RAID controller?
Q10191403 - Are 4TB drives supported on Areca RAID controllers?
Q60011407 - On Areca Desktop Box, will the Seagate STBD6000100 6TB drive fit your drive sled without modification?
Q40011407 - With an ARC-8068 (which has one volume on it) attached to a 9200-8e LSI HBA that causes a blue screen with "BAD_POOL_CALLER" on 2012R2. Setup works fine under Windows 7 and 2008.
Q60011408 - 12Gb/s SAS Drives will not be detected on ARC-8040 storage.
Q10011408 - How to solve the problem with reads stalling that causes by out of order command completion.
Q10031410 - Two Bad drives: Hus724040ale640 connected to Areca 1882X, can’t power on server and time out after 300secs.
Q10041410 - ARC-1882ix-12 can not recognize in Windows 2008R2 device manager when put into Asus m/b P8P67 WS revolution. Other m/b works fine.
Q10061410 - Does Areca firmware have day/time to program the Volume Check Scheduler?
Q10071410 - I'd like to know how to set and keep the clock settings for the PCIe RAID controller without using NIC. Everytime I look at the event log, the times are off, thus making the logs useless.
Q10021411 - Mac OS X Disk utility sees the new creation volume but doesn't allow any operation (erase or partition).
Q10031411 - Areca RAID controllers can only detect 10 HDDs with Quanta M4600H 60-bays JBOD.
Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed function.
Q60011309 - ARC-5040 with the Esata Cable to Fujitsu Celsius R920 Computer (C600 chip set) instantly gets a BSOD on Windows 7 X64. BSOD always says "iastorA.sys" .
Q60011311 - How do I enable ARC-5040 USB 3.0? USB 2.0 works but when plugged in via USB 3.0 the access light only flashes. No device is made available to the OS.
Q60011312 – ARC-8040 with ARC1320-8X can not work using macnonraid_install_arcsas-20130819 under Mac OS X 10.9, but it can work with MAC 10.7。
Q60011202 - The ATTO H380 has wide port issue with SAS RAID subsystem, which limited its performance since it will only connect through 1 SAS lane. The H680 performance is lower than we have expected. Does H680 have the same issue with ARC-8040?
Q60011203 - When ARC-5040 configure USB 3.0 and connect to computer, the access LED will be blinking by itself and it won't stop.
Q60011208 - I plug the ARC-5040 box USB 3.0 port into an Apple MacBook Air with USB 3.0 support. The USB 3.0 port link LED green light starts blinking and never stops. The computer never sees the USB 3.0 connection only USB 2.0.
Q60021208 - I plug the ARC-5040 box USB 3.0 port into a system with USB 3.0 support. The access light starts blinking and never stops. I want the LED light-up only when there is HDD activity.
Q60011101 - The ARC-5040 has two FireWire ports. We were looking to use these for our Microsoft Hyper-V setup. Are we able to connect a FireWire port to each Microsoft Hyper-V having access to the storage from both at the same time?
Q60021101- The ARC-5040 performed flawlessly with USB 2.0 and eSATA but when I plug the box into a USB 3.0 port the green light starts blinking and never stops. Even when I unplug the USB 3.0 cable the green light blinks. The computer never sees the connection when using USB 3.0.
Q60011001 - Is there any initiator for Mac OS X which can work with ARC-5040 iSCSI host?
Q60011012 - We would buy an ARC-5040 as a portable storage tower for a laptop. But now it seems that the laptop (Toshiba x505 with intel e-sata chipset) can’t see raid volumes bigger than 2TB. I read that the ICH10R chipset supports 64Bit LBA. Is this correct?
Q40011508 - USB 3.0 Port of the 5040 sometimes detects only with 2.2TB Size (original size 18TB) in combination with Macbooks or Notebooks which are built 2014 or newer.
Q10041508 - Does Areca RAID adapter support the new WD 5TB/6TB HDD firmware update function code about 5MB in size?
Q10011509 - Does Areca RAID adapter support write back cache with battery backed RAM on JBOD disks or passthrough disk?
Q10011512 - One SSD Disk fails in the ARC-1883i Raid Set a while in usage. After changing the Disk, it fails after a few hours again.