Areca FAQ System - Q30011412 - Regarding SATA port multiplier support for the ARC-1320 HBAs, do those HBAs support FIS-based switching or only command-based switching?

Q30011412 - Regarding SATA port multiplier support for the ARC-1320 HBAs, do those HBAs support FIS-based switching or only command-based switching?

Arc-1320 HBAs support FIS-based switching.

Tags: ARC-1320

Last update:: 2021-02-04 10:16
Author:: Simone
Revision:: 1.3

You cannot comment on this entry

Records in this category

Q30011501 - ARC-1320-8X can not work with Infortrend SAS storages - ESDS S12S-G2240 using driver version 6.0.0.10.
Q30011503 - Ubuntu kernel version 3.5.17 gets kernel panic after ARC-1320 HBA driver is loaded with a Quantum Ultrium 6 drive (Model: AQ285A#900) using LTFS.
Q30021503 - Does ARC-1320 Mac driver use MSI?
Q30011504 - ARC-1320ix-16 shows the following massage on the X10DRL-I M/B for about 6 minute “**Warning** : Something Wrong With The Adapter!
Q30011505 - ARC-8040 with ARC-1320-8X is poor AJA performance can after HBA loads BIOS default setting.
Q30011403 - Flashing disk drives attached to an Areca SAS host adapter.
Q30021403 - Does TRIM support on Areca HBAs.
Q30011405 - The OS won't boot all the way to login prompt when insert Seagate ST3000NC000 to ARC-1320-8i using Linux driver: arcsas1.1.2-130827.zip.
Q30021405 - can you please tell us whether the ARC-1320 supports "LTFS" under Linux?
Q30011406 - ARC-1320 Driver - ArcSAS-V2.0.3 can write and read tape using a 1MB buffer on block size set 4M fixed. But if we go to 2MB on the BRU I/O operations, the card fails to allow access to the tape drive at all.
Q30011407 - Is there any compatible issue using an ARC-1320 with AIC XJ3000-4603M 60 bays?
Q30011412 - Regarding SATA port multiplier support for the ARC-1320 HBAs, do those HBAs support FIS-based switching or only command-based switching?
Q30021412 - When the Arcsas-1320's driver for FreeNAS 9.3 would be available?
Q30011307 - LTFS Software can not find ARC1320-4I4X device using TDWinDrivers Ver.1.0.7 and Windows driver version 6.0.0.7.
Q30011202 - ARC-1300-4i and a hp sas expander works perfectly in windows 7. After a fresh install of windows 7 driver version 6.0.0.4, the areca card does not work if the expander is attached.
Q30011507 - ARC-1320-8i can only recognize one when two LTO tape drives connect on each port.
Q30011001 - My system has two ARC-1300ix-16 host adapters, and I'm experiencing four passes of the bios during bootup. This makes the bootup process very long, but the HBA's function fine once booted.
Q30011508 - Does ARC-1320ix-16 HBA work with UNRAID?
Q30011510 - The ArcSAS installer can not work on new installs of the driver and Mac OS 10.11.