External cable connector: i, j, k,.. is the index which range from 0 to 3 on the ARC-8028. According to view from connector side, index start from right to left or top to bottom. The cable c0, c1, or c2 is view from right to left or start from top to bottom. Use the “sub” command to assign connector c0 and c1 as subtractive ports for ARC-1883X two external outputs.
CLI>sub
Current Subtract Connector: C1,
;;;; set connector c0 and c1 as subtractive ports
CLI>sub c0,c1
New Subtract Connector: C0,C1,
Current Subtract Connector: C1,
CLI>st
CLI>reset
Tags: ARC-1883x, ARC-1883x, ARC-8028, daisy chain, Q50011404