Q10040903- At system boot the controller shows two arrays of which one has failed and one is successful. This is strange because the ARC-1200 supports only 2 disks and one array with two disks is fine. The web interface only shows one raid set. I only see the second raid set when I boot the system. Also, when entering the RAID Bios with F6, I only see one RAID set. The second RAID set shown at bootup has exactly the same name as the RAID set that I am using now.


Regarding ID/LUN support problem, please modify the volume setting from ID0/LUN1 to ID1/LUN0. The issue can also be solved by updating the firmware and BIOS package to version 1.46-900106.

Tags: ARC-1200, BIOS, boot, firmware, RAID
Last update:
2022-01-06 07:57
Author:
Simone
Revision:
1.1
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Records in this category

Tags