Please update the firmware to V1.56 2019-1-24 or later version for this workaround.
Tags: Archttp, firmware, Safari- FAQ Home
- All categories
- SATA/SAS PCI RAID Card
- Mezzanine Board
- SAS Non-RAID Adapters
- External RAID Controllers
- JBOD/Expander Box
- Desktop RAID Subsystem
- Internal RAID Rack
- Thunderbolt Solutions
126 users online | 126 Guests and 0 Registered
Q10041901 - The ArcHTTP Config opens in the Safari window but when I try to log into the card, it just gives me the username and password window over and over.
- Last update:
- 2019-01-28 04:17
- Author:
- Simone
- Revision:
- 1.0
You cannot comment on this entry






Records in this category
- Q10011901 - I created a raid10 on 4 ST2000NM0115 disks with a single 4TB volume. During POST the message appears that the controller BIOS is not loaded.
- Q10021901 - Unlocked RAID Array not showing up in Ubuntu Linux 16.04.5
- Q10031901 - If I try to create RAID volumes using Toshiba's HDD * 6, MN05ACA800, it does not start the initialization.
- Q10041901 - The ArcHTTP Config opens in the Safari window but when I try to log into the card, it just gives me the username and password window over and over.
- Q10051901 - ARC-1224/5028T2 cannot recognize more than one D3-S4510 SSD drive. With 12x6 or 1883 controllers the SSDs do not have such behavior.
- Q10061901 - For video files, 1883X transfer is ok. But small audio files (about 3.67 MB file size) are low speed. Is there adjusted something then it becomes fast?
- Q10011903 - Does your ARC-1884ixl UEFI code pass the Microsoft UEFI CA sign?
- Q10021903 - Under Centos 6 32-bit Linux 4.4, we get slow write speed. # dd if=/dev/zero of=/mnt/das.h/testFile bs=100M count=1 oflag=dsync 1+0 records in 1+0 records out 104857600 bytes (105 MB) copied, 20.3667 s, 5.1 MB/s
- Q10031903 - If disk sets to fail in the configuration, the ARC-1214 with the PCB revision 2.0 WebGUI crashes.
- Q10031903 - If disk sets to fail in the configuration, the ARC-1214 with the PCB revision 2.0 WebGUI crashes.
- Q10041903 - Does ARC-1883 series support error injections to simulate SMART errors?
- Q10051903 - I am having issues installing ARC-1203 driver on CENTOS 3.10.0-957.5.1.el7.x86_64. The kernel driver will no longer load after the update.
- Q10061903 - ARC-1224-8i Ver2.0 cards downgraded to the firmware 1.54-2017-03-08, it causes the Motherboard video outputs to not output any video.
- Q10071903 - Is ARC-1203-4i compatible with PCIe x2 slot bandwidth?
- Q10081903 - I'm trying to install ArcHTTP on windows server 2019 essential, the installation starts but it stopping.
- Q10091903 - Is there any example to tell what look the alert would be when SMART errors occurred?
- Q10101903 - Controller is showing “Incompleted” and RAID not showing.
- Q10011905 - The 1.56 firmware makes my DELL r720 unbootable - it stuck on "initializing firmware interfaces". I have switched back and boots again.
- Q10011907 - For firmware version V1.51 2012-07-04, could you please clarify the below? 1. What is the maximum capacity per disk drive support? 2. What is the maximum capacity per volume set?
- Q10021907 - How to configure the SSL and port settings on the ARC-SAP email setting?
- Q10031907 - The ARC-SAP email is working officially using Office365 (Microsoft) for the notification.
- Q10041907 - I can’t make the ARC-SAP in Windows 2019 to send with gmail server.
- Q10021908 - What is the maximum HDD capacity of Areca RAID controller’s firmware?
- Q10031908 - Has your ArcSAP for Mac been notarized?
- Q10041908 - Can you have a special firmware to disable the “Volume Encryption” and “SED” encryption?
- Q10011909 - Our custumer is running Supermicro X9DRI-LN4F+ (BIOS 3.0b) und ARC-1883 (Firmware 1.54 - 2016-11-23), booting hang at the POST screen with a B2 code.
- Q10021909 - Downgrading the firmware to V1.55 3/23/2018, ARC-1883ix-16 card PCB Ver: 2.1 locks up after upgrading the firmware to V1.56 7/30/2019 again.
- Q10031909 - ARC-1203 can't really wake up from W10 standby. It takes about 3 minutes with a black screen until the PC boots itself.
- Q10011910 - The Seagate Nytro 3031 series + 1884 controllers mostly all SSDs are detected as failed when you do a normal restart.
- Q10021910 - Can you send me Windows XP 32 Bit driver for ARC-1203-2i?
- Q10031910 - I have started to use the areca RAID adapter build in Ethernet port. I can log in to telnet and http. How do I restrict access to the telnet port or SMTP?
- Q10041910 - What is the max no. of SAS expander and enclosure Areca firmware supported?
- Q10011911 - Could you please provide us the official driver disk ISO for RHEL 8.0 like it was included in the driver packages for RHEL 7.X?
- Q10021911 - Is there a way to redirect all the event of the RAID card to the Windows event viewer?
Tags
12Gb/s SAS expander 4KN drive Acronis Advanced Data Mirroring AJA Alert By Mail Configuration ALUA AOC API ARC-1035 ARC-1130 ARC-1200 ARC-1201 ARC-1202 ARC-1203 ARC-1203-2i ARC-1210 ARC-1212 ARC-1213 ARC-1213-4i ARC-1214 ARC-1214-4I Arc-1214-8I ARC-1220 ARC-1221 ARC-1221x ARC-1222 ARC-1223 ARC-1223-8i ARC-1223-8X ARC-1224 ARC-1224-8I ARC-1225-8I ARC-1231 ARC-1231Ml ARC-1260 ARC-1261ML ARC-1264il-12 ARC-1264il-16 ARC-1280 ARC-1280ML ARC-12x3 ARC-12x4 ARC-12x5 ARC-12x6 ARC-1300 ARC-1300-4e ARC-1300-4i ARC-1300ix-16 ARC-1320