Legacy bios code does not support devices with 4k block size. Those drives are 4kn model so the volume will use 4k size. This is the reason you saw bios not installed message. Please configure the raid card works with UEFI bios mode and also configures your motherboard to use UEFI to load option ROMs.
Tags: 4KN drive, BIOS, UEFI- FAQ Home
- All categories
- SATA/SAS PCI RAID Card
- Mezzanine Board
- SAS Non-RAID Adapters
- External RAID Controllers
- JBOD/Expander Box
- Desktop RAID Subsystem
- Internal RAID Rack
- Thunderbolt Solutions
118 users online | 118 Guests and 0 Registered
Q10011901 - I created a raid10 on 4 ST2000NM0115 disks with a single 4TB volume. During POST the message appears that the controller BIOS is not loaded.
- Last update:
- 2019-01-28 03:42
- Author:
- Simone
- Revision:
- 1.0
You cannot comment on this entry






Records in this category
- Q10011901 - I created a raid10 on 4 ST2000NM0115 disks with a single 4TB volume. During POST the message appears that the controller BIOS is not loaded.
- Q10021901 - Unlocked RAID Array not showing up in Ubuntu Linux 16.04.5
- Q10031901 - If I try to create RAID volumes using Toshiba's HDD * 6, MN05ACA800, it does not start the initialization.
- Q10041901 - The ArcHTTP Config opens in the Safari window but when I try to log into the card, it just gives me the username and password window over and over.
- Q10051901 - ARC-1224/5028T2 cannot recognize more than one D3-S4510 SSD drive. With 12x6 or 1883 controllers the SSDs do not have such behavior.
- Q10061901 - For video files, 1883X transfer is ok. But small audio files (about 3.67 MB file size) are low speed. Is there adjusted something then it becomes fast?
- Q10011903 - Does your ARC-1884ixl UEFI code pass the Microsoft UEFI CA sign?
- Q10021903 - Under Centos 6 32-bit Linux 4.4, we get slow write speed. # dd if=/dev/zero of=/mnt/das.h/testFile bs=100M count=1 oflag=dsync 1+0 records in 1+0 records out 104857600 bytes (105 MB) copied, 20.3667 s, 5.1 MB/s
- Q10031903 - If disk sets to fail in the configuration, the ARC-1214 with the PCB revision 2.0 WebGUI crashes.
- Q10031903 - If disk sets to fail in the configuration, the ARC-1214 with the PCB revision 2.0 WebGUI crashes.
- Q10041903 - Does ARC-1883 series support error injections to simulate SMART errors?
- Q10051903 - I am having issues installing ARC-1203 driver on CENTOS 3.10.0-957.5.1.el7.x86_64. The kernel driver will no longer load after the update.
- Q10061903 - ARC-1224-8i Ver2.0 cards downgraded to the firmware 1.54-2017-03-08, it causes the Motherboard video outputs to not output any video.
- Q10071903 - Is ARC-1203-4i compatible with PCIe x2 slot bandwidth?
- Q10081903 - I'm trying to install ArcHTTP on windows server 2019 essential, the installation starts but it stopping.
- Q10091903 - Is there any example to tell what look the alert would be when SMART errors occurred?
- Q10101903 - Controller is showing “Incompleted” and RAID not showing.
- Q10011905 - The 1.56 firmware makes my DELL r720 unbootable - it stuck on "initializing firmware interfaces". I have switched back and boots again.
- Q10011907 - For firmware version V1.51 2012-07-04, could you please clarify the below? 1. What is the maximum capacity per disk drive support? 2. What is the maximum capacity per volume set?
- Q10021907 - How to configure the SSL and port settings on the ARC-SAP email setting?
- Q10031907 - The ARC-SAP email is working officially using Office365 (Microsoft) for the notification.
- Q10041907 - I can’t make the ARC-SAP in Windows 2019 to send with gmail server.
- Q10021908 - What is the maximum HDD capacity of Areca RAID controller’s firmware?
- Q10031908 - Has your ArcSAP for Mac been notarized?
- Q10041908 - Can you have a special firmware to disable the “Volume Encryption” and “SED” encryption?
- Q10011909 - Our custumer is running Supermicro X9DRI-LN4F+ (BIOS 3.0b) und ARC-1883 (Firmware 1.54 - 2016-11-23), booting hang at the POST screen with a B2 code.
- Q10021909 - Downgrading the firmware to V1.55 3/23/2018, ARC-1883ix-16 card PCB Ver: 2.1 locks up after upgrading the firmware to V1.56 7/30/2019 again.
- Q10031909 - ARC-1203 can't really wake up from W10 standby. It takes about 3 minutes with a black screen until the PC boots itself.
- Q10011910 - The Seagate Nytro 3031 series + 1884 controllers mostly all SSDs are detected as failed when you do a normal restart.
- Q10021910 - Can you send me Windows XP 32 Bit driver for ARC-1203-2i?
- Q10031910 - I have started to use the areca RAID adapter build in Ethernet port. I can log in to telnet and http. How do I restrict access to the telnet port or SMTP?
- Q10041910 - What is the max no. of SAS expander and enclosure Areca firmware supported?
- Q10011911 - Could you please provide us the official driver disk ISO for RHEL 8.0 like it was included in the driver packages for RHEL 7.X?
- Q10021911 - Is there a way to redirect all the event of the RAID card to the Windows event viewer?
Tags
12Gb/s SAS expander 4KN drive Acronis Advanced Data Mirroring AJA Alert By Mail Configuration ALUA AOC API ARC-1035 ARC-1130 ARC-1200 ARC-1201 ARC-1202 ARC-1203 ARC-1203-2i ARC-1210 ARC-1212 ARC-1213 ARC-1213-4i ARC-1214 ARC-1214-4I Arc-1214-8I ARC-1220 ARC-1221 ARC-1221x ARC-1222 ARC-1223 ARC-1223-8i ARC-1223-8X ARC-1224 ARC-1224-8I ARC-1225-8I ARC-1231 ARC-1231Ml ARC-1260 ARC-1261ML ARC-1264il-12 ARC-1264il-16 ARC-1280 ARC-1280ML ARC-12x3 ARC-12x4 ARC-12x5 ARC-12x6 ARC-1300 ARC-1300-4e ARC-1300-4i ARC-1300ix-16 ARC-1320