Q50031907 - How to dump the active cable data using Areca JBOD command?


Commands to dump the active optical cable serial eprom data

 

cable [c0|c1|c2|..]

 CLI>lsd con

 Show SES elements information

 Connector Element (0x19):

 ========================================

 NAME         PHY  NLR   TYPE  ROUTE CONNECTED-ADDRESS

 Connector00  20         05

 Connector00  21         05

 Connector00  22         05

 Connector00  23         05

 Connector01  16   12G   05    S     500605B0-0388B8B0

 Connector01  17   12G   05    S     500605B0-0388B8B0

 Connector01  18   12G   05    S     500605B0-0388B8B0

 Connector01  19   12G   05    S     500605B0-0388B8B0

 CLI>cable c1                 ;; c1 is the Connector01

 

If the command can read the serial eeprom data then it is an active cable, otherwise passive.

 

 

 

 

Tags: cable, CLI, eprom, JBOD
Last update:
2019-07-17 08:57
Author:
Simone
Revision:
1.0
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.