Areca FAQ System - Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?

Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?

TLER, ERC and CCTL are same setting with different names.

Tags: Q10091501

Last update:: 2015-08-24 08:36
Author:: Simone
Revision:: 1.1

You cannot comment on this entry

Records in this category

Q40011602 - ST4000NM0033 Seagate enterprise HDD can’t pass self test of ARC-8008 RAID controller shown randomly time out error, when system powers on.
Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled" again, but the setting is stuck.
Q40011603 - What is the max CPU Temperature of the ARC-5066 or at which temperature it starts to log and throttle?
Q10011605 - CLI is showing garbage Slot# larger than 32 when the Disk Info command is issued to HGST JBOD 4U60.
Q10021605 - Is there a way to tell RAID controller hardware revision in software?
Q10031605 - The ARC-1883ix appears to scroll though the disks in the Quanta M4600H JBOD until it hits the disk drive in slot 49.
Q10041605 - The ARC-1883ix is hanging on a particular slot when booting the HGST 60 Bay. Removing and reinserting the drive in the particular slot to allow the ARC-8781 boot process to complete.
Q40011607 - Do Areca external RAID controllers support SED drive with encrypted function?
Q40011609 - We need to remove the Guest account access on the RAID card GUI. (Username=Guest, Password=Guest)