You can use the no-interactive mode to get the local information from the remote side.
There are two methods from remote side to get the information.
Method 1: Direct connection:
Connect to build-in ethernet port on the RAID HBA, command:
CLI> set ctrl=192.168.0.100
Method 2 :Through ArcHTTP
Connect to ArcHTTP through the host ethernet port, command:
CLI > set ctrl=192.168.0.100 port=7891 (7891 refers to the 1st RAID HBA, 7892 refers to the 2nd RAID HBA and etc... )Tags: Archttp, ethernet, HBA