Q10081311 - For local system which has the Areca card installed, but what if I need to get the event message from another system in the network?

You can use the no-interactive mode to get the local information from the remote side.

There are two methods from remote side to get the information.

Method 1: Direct connection:

Connect to build-in ethernet port on the RAID HBA, command:

CLI> set ctrl=


Method 2 :Through ArcHTTP

Connect to ArcHTTP through the host ethernet port, command:

CLI > set ctrl= port=7891 (7891 refers to the 1st RAID HBA, 7892 refers to the 2nd RAID HBA and etc... ) 

Tags: Archttp, ethernet, HBA
Last update:
2015-08-24 11:24
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Records in this category