Questions in 2024 to 2025
Page 2 out of 3 Pages
- Q90032502- When ARC-1203-2N with NVMe mode power-on/cold boot, Supermicro X13SEI-TF Bios will not detect the RAID volume.
(1197 views) - Q90022502- After the firmware upgrade the Web UI supports HTTPS. How can I disable HTTP running on Port 80?
(973 views) - Q90012502- The Volume Consistency check is being executed, if the unit is being rebooted, the volume check does not automatically pick up where it stopped.
(1148 views) - Q90012412- What would be the benefit of Areca RAID adapter host interface switching from "Areca Legacy Mode" (currently on) or "NVME Mode"?
(2490 views) - Q90052411 - Under Areca NVMe emulation mode, it needs to revise Timeout and DPC Watchdog Time after Windows installed.
(3785 views) - Q90042411 - After every 3.5-4.5 hours, the storage on the ARC-1203-2N RAID controller becomes unavailable (failed) for the Proxmox operating system. Only “Time Out Error” information was found on the ARC-1203-2N.
(2199 views) - Q90032411 - Can ARC-1886-16i card work with Broadcom cable and Areca cable, a x8 SFF-8654 to x8 U.3 SFF-8639 connection using Micron 7540 U.3?
(2251 views) - Q90022411 - How to enable NVMe mode to use NVM in-box driver?
(3454 views) - Q90012411 - What firmware and software suite start to support native NVMe mode on Areca RAID adapter?
(1617 views) - Q90022410 - Supermicro X11DPH-T will hang at boot POST on ARC-1886-4X12I with firmware 1.70, even without any disk attached. Tried: auto, legacy, uefi no difference, all hangs at counting the seconds, either hang at “0” or “5” seconds.
(2026 views)