Questions in 2024
Page 2 out of 3 Pages
- Q90042411 - After every 3.5-4.5 hours, the storage on the ARC-1203-2N RAID controller becomes unavailable (failed) for the Proxmox operating system. Only “Time Out Error” information was found on the ARC-1203-2N.
(513 views) - Q90032411 - Can ARC-1886-16i card work with Broadcom cable and Areca cable, a x8 SFF-8654 to x8 U.3 SFF-8639 connection using Micron 7540 U.3?
(539 views) - Q90022411 - How to enable NVMe mode to use NVM in-box driver?
(542 views) - Q90012411 - What firmware and software suite start to support native NVMe mode on Areca RAID adapter?
(375 views) - Q90022410 - Supermicro X11DPH-T will hang at boot POST on ARC-1886-4X12I with firmware 1.70, even without any disk attached. Tried: auto, legacy, uefi no difference, all hangs at counting the seconds, either hang at “0” or “5” seconds.
(451 views) - Q90012410 - In Windows 10, if the ARC-1886 has no volume, ARCHTTP v3.0.0 will not detect the ARC-1886 on NVMe mode.
(536 views) - Q90052408 - The Hyper-V PCI CentOS 6 hv_pci driver cannot handle ARC-1886 RAID adapter. But ARC-1883 works well.
(811 views) - Q90042408 - Intel MAC via Thunderbolt 3 to ARC-1686 or 1886, the revision / firmware # of the device shows as "R001" regardless of what the device is.
(465 views) - Q90032408 - ARC-1886-16i with 15 SATA SSD in CSE-M28SAB Supermicro bays can detect all Kingston DC600M 7.68TB SATA SSD 15 disks when they are free. “Trim” after creating volume, two drives dropped.
(410 views) - Q90022408 - After installation of the ARC-1686-4NOD into our HPE ProLiant DL385 Gen10 Plus server and rebooting, the server always boots straight into McBIOS instead of booting the installed OS.
(547 views)