FAQ in 2011 to 2015

Page 1 out of 3 Pages

• Q10011512 - One SSD Disk fails in the ARC-1883i Raid Set a while in usage. After changing the Disk, it fails after a few hours again.
  (5118 views)
• Q10011509 - Does Areca RAID adapter support write back cache with battery backed RAM on JBOD disks or passthrough disk?
  (6928 views)
• Q10041508 - Does Areca RAID adapter support the new WD 5TB/6TB HDD firmware update function code about 5MB in size?
  (7226 views)
• Q40011508 - USB 3.0 Port of the 5040 sometimes detects only with 2.2TB Size (original size 18TB) in combination with Macbooks or Notebooks which are built 2014 or newer.
  (5749 views)
• Q40011108 - After changing the "Inband SAS enable" to enabled in the telnet interface of our ARC-8060, the telnet and web interface are not available.
  (1999 views)
• Q40011204 -The LED lights on st3000DM001 HDD's with firmware CC46 continues to flash even no activity. We tried with other disks and they work normal.
  (4889 views)
• Q40021305 - Do ARC-8006/8007 external raid controller support ALUA on redundant controller mode?
  (5638 views)
• Q40011305 - LSI SAS switch only sees the first volume/LUN from the 8068 and not any of the others. All connected hosts see all volumes.
  (4619 views)
• Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed function.
  (4429 views)
• Q10031411 - Areca RAID controllers can only detect 10 HDDs with Quanta M4600H 60-bays JBOD.
  (4896 views)

30

one category up