Questions in 2009 to 2011
FAQ in 2009 to 2011
Page 6 out of 12 Pages
- Q10091001 - I noticed the line "PMC Expander + SATA Hdd performance" in the change log for the firmware 1.48 update. I wondered if you could provide more description of what the change means. I have a storage blog where I frequently recommend Arc-1680 cards to people, to use in combination with the HP SAS Expander, which is a PMC-based expander.
(3254 views) - Q10081001 - We are experiencing problems with an Arc-1130. When we insert a new drive, it is not detected by the controller, if we reboot the system the controller rescans the disks and detects the drives, its ok. But only after a reboot. It seems the controller needs to rescan its ports to detect the disks but this causes us problems because we have to reboot the system every time.
(6322 views) - Q10071001 - I have a problem getting the "alert by mail configuration" to work through the ARCHTTP proxy when the local firewall is enabled on the host OS - Windows 2008 SP2 x64. How does the ARCHTTP proxy work, and how do I make it function through the firewall? If I simply disable the firewall, the alerts are working, but that is not a solution.
(3386 views) - Q10061001 - I just installed Windows 7 on my computer with ARC-1231Ml, no problem, only I also want to install the 64bit version. Using the drivers located at:
ftp://ftp.areca.com.tw. The raid is not recognized, I am forced to use the 32bit drivers to see my raid but the installation is defective.
(5695 views) - Q10051001 - The ARC-1202 RAID card has another problem. Windows 7 takes forever to boot (~ 4 hours) after I installed the card Driver v6.20.0.19 (2009-09-23).
(5331 views) - Q10041001 - User upgraded the MAC OS-X to 10.5.8. Upgraded the Areca firmware version to 1.4.7 from www.areca.com.tw, and then loaded in the updated driver for the card. Once he did this, the ARC-1221x drive array no longer mounted. He could see the drives in MRAID (using Firefox at http://localhost:81), but no errors were shown, and everything appeared to be normal. However, the drive array was no longer seen by the Macintosh computer.
(6052 views) - Q10031001 - System will not get past ARC-1680ix card bios boot screen when plugged into Promise e610p raid array using external SAS connector. When the cable is unplugged during boot system gets to windows fine. System runs fine as long as it is not connected to the raid array.
(5754 views) - Q10021001 - I can’t connect RAID setting page with Safari of Mac that installs ARC-1680. Is there something a necessary setting?
(5534 views) - Q10011001 - On one of our RAID servers with Areca 1680ix-24, we received following errors:
2009-7-31 15:38:48 H/W Monitor Fan Recovered
2009-7-31 15:38:18 H/W Monitor Fan Failed
(6150 views) - Q10081112 - I install Microsoft Windows 7 in GPT mode with Areca ARC-1882i RAID volume on Asus P8Z68-V Pro, and I cannot boot into Microsoft Windows 7.
(6415 views)
FAQ in 2009 to 2011