Questions in 2010 to 2015
FAQ in 2010 to 2015
Page 1 out of 2 Pages
- Q30011510 - The ArcSAS installer can not work on new installs of the driver and Mac OS 10.11.
(4504 views) - Q30011508 - Does ARC-1320ix-16 HBA work with UNRAID?
(4653 views) - Q30011001 - My system has two ARC-1300ix-16 host adapters, and I'm experiencing four passes of the bios during bootup. This makes the bootup process very long, but the HBA's function fine once booted.
(3975 views) - Q30011507 - ARC-1320-8i can only recognize one when two LTO tape drives connect on each port.
(4595 views) - Q30011202 - ARC-1300-4i and a hp sas expander works perfectly in windows 7. After a fresh install of windows 7 driver version 6.0.0.4, the areca card does not work if the expander is attached.
(4349 views) - Q30011307 - LTFS Software can not find ARC1320-4I4X device using TDWinDrivers Ver.1.0.7 and Windows driver version 6.0.0.7.
(3818 views) - Q30021412 - When the Arcsas-1320's driver for FreeNAS 9.3 would be available?
(4562 views) - Q30011412 - Regarding SATA port multiplier support for the ARC-1320 HBAs, do those HBAs support FIS-based switching or only command-based switching?
(4307 views) - Q30011407 - Is there any compatible issue using an ARC-1320 with AIC XJ3000-4603M 60 bays?
(4737 views) - Q30011406 - ARC-1320 Driver - ArcSAS-V2.0.3 can write and read tape using a 1MB buffer on block size set 4M fixed. But if we go to 2MB on the BRU I/O operations, the card fails to allow access to the tape drive at all.
(5047 views)
FAQ in 2010 to 2015