The problem is that the drive is not initialized, so it does not carry overwrite-repair action on factory bad bock and cause the read errors. First, you must initialize the drive, and then it will allow you to run Hdd Xfer Speed function.
Tags: drive, Q10061412Q10061412 - Controller fails the brand new hard drive when runs the Hdd Xfer Speed function.
- Last update:
- 2022-01-06 07:04
- Author:
- Simone
- Revision:
- 1.2
You cannot comment on this entry
Records in this category
- Q10051603 - Set "HDD Low power Idle" to "7" and test. Then reset to "Disabled" again, but the setting is stuck.
- Q40011603 - What is the max CPU Temperature of the ARC-5066 or at which temperature it starts to log and throttle?
- Q60011607 - Do Areca RAID controllers support SED drive with encrypted function?
- Q60011609 - We need to remove the Guest account access on the RAID card GUI. (Username=Guest, Password=Guest)
- Q60011705 - Do current GA versions of vSphere and VSAN support 4K Native drives?
- Q60011706 - Firmware V1.54 2016-05-13 Alarm By Mail function sends incorrect day of week.
- Q60011710 - Does the Areca SED function support conform to the Trusted computing Group specifications Opal, Enterprise or both?
- Q60011712 - The ArcSAP utility keeps crashing when I try to open it.
- Q60011802 - macOS 10.13 High Sierra Security requires a user’s approval before loading third-party kernel extensions.
- Q60011805 - I am getting a random 3.3V over voltage error on ARC-5088 RAID controller.
- Q60011807 - ARC-9200 firmware is not able to register the Hitachi Ultrastar 4U Data102 we have here.
- Q60021807 - 4U60G2 through ARC-9200, Single controller becomes disabled when it loses connection to JBOD. How can we reactivate it?
- Q60031807 - Is it possible to support dual LCD function if the 8088-2S is in a dual-controller mode?
- Q60041807 - No hardware information displayed on slave unit (controller-2) when ARC-8088-SAS is working dual controller mode.
- Q60011811 - ATTO Expresssas H1280 can not work with ARC-8380 SAS RAID subsystem. When we try to write information to the drive it becomes unresponsive. We can web browser ok with no errors and have tried both SAS ports on the SAS card and the Raid unit.
- Q60011903 - When ARC-8050U3-6 USB-C raid enclosure plugged into the super micro mother board it is not allowing the M/B to boot.
- Q60021903 - The ARC-8050U3-6 is powering down after certain time during foreground initialization even if HP spectre 360 is on and working.
- Q60031903 - How to disable Windows 10's 'USB selective suspend' setting?
- Q60041903 - Can ARC-8050U3-6 support multiple volumes?
- Q60011907 - How to configure the SSL and port settings on the ARC-SAP email setting?
- Q60021907 - The ARC-SAP email is working officially using Office365 (Microsoft) for the notification.
- Q60031907 - I can’t make the ARC-SAP in Windows 2019 to send with gmail server.
- Q60011908 - What is the maximum HDD capacity of Areca RAID controller’s firmware?
- Q60011909 - ATTO H1280 PORT A can’t detect the volume on the ARC-7212 SAS RAID subsystem.
- Q60011910 - What is the max no. of SAS expander and enclosure Areca firmware supported?
- Q60011911 - Is this possible with the ARC-9200 and if it is possible to send signal by protocol Modbus TCP/IP to SNMP server in case of failure”?
- Q60011912 - When commissioning s an ARC-8070 new volume under Linux, a number of index tables (I-node tables) are distributed over the entire volume.
- Q60011912 - When commissioning s an ARC-8070 new volume under Linux, a number of index tables (I-node tables) are distributed over the entire volume.
- Q60012003 - For ARC-8608-4 32G FC D.B, 16Gb SFP detect and working normal but 8Gb SFP detect unknown.
- Q60012009 - How to solve the “Volume for BBM – Mismatch” message shows on the ARC-9200 event log, and always showing “initializing” for the dual controller status.
- Q60012012 - ARC-8050U3-6 can’t startup when it has not any HDD installed.
Tags
1203 12Gb/s SAS expander 1883 1886 4KN drive Acronis Advanced Data Mirroring AJA Alert By Mail Configuration ALUA AOC API ARC-1035 ARC-1130 ARC-1200 ARC-1201 ARC-1202 ARC-1203 ARC-1203-2I ARC-1203-8i ARC-1210 ARC-1212 ARC-1213 ARC-1213-4i ARC-1214 ARC-1214-4I Arc-1214-8I ARC-1220 ARC-1221 ARC-1221x ARC-1222 ARC-1223 ARC-1223-8i ARC-1223-8X ARC-1224 ARC-1224-8I ARC-1225-8I ARC-1230-8x ARC-1231 ARC-1231Ml ARC-1260 ARC-1261ML ARC-1264il-12 ARC-1264il-16 ARC-1280 ARC-1280ML ARC-12x3 ARC-12x4 ARC-12x5 ARC-12x6